займ на карту срочно без отказа займ онлайн
Apr 30

As a expert in solids control equipment and system, Hebei GN Solids Control has extended its business into
drilling waste managemeng equipment and system on the basis of existing product. Normally for OBM drilling waste,
vertical cutting dryer will be used to dry the waste or cutting, and the oil content will be reduced below 6%.
To collect more clean and useful mud,the liquids discharged from vertical cutting dryer will be pumped into a
decanter centrifuge for further treatment. Also, the WBM drilling waste and cutting can also be treated by vertical
cutting dryer. Beside vertical cutting dryer, the WBM drilling waste can also be treated by high G shale shakers.
Recently, one set of drilling waste management with shale shaker and decanter centrifuge is ready for delivery ar GN facility.
The customer is from Beijing, a famous oil service company and this set of drilling waste management system is going to do project

for Chian National Petroleum Corporation(CNPC).

drilling_waste_Hi_G_system

This set of drilling waste management system is used for non-falling on the ground project.
The cuttings discharged from the general shale shaker will fall into the high-G dryer shaker with high API number shaker screen,
and then the liquids will be delivered to the high speed decanter centrifuge for treatment by a nemo pump, and the liquids will be
collelcted in the active tanks for recycling usage. This set of drilling waste management system includes the below main treating
equipment. 1 set of high G dryer shaker; 1set of high speed decanter centrifuge, and 2 set of screw pump. GN high G shaker can reach
to a G force of 8.0 G with stainless steel bottom deck after heatment in order to maker the shaker work stably at high G force.

written by desander desilter


Leave a Reply

займ на карту срочно без отказа онлайн займ на карту без отказа