займ на карту срочно без отказа займ онлайн
Nov 10

GN solids America is the subsidiary 100% owned by GN Solids Control. Since its established in Houston about 5 years ago, its function as the sales hub and after sales center has been recognized by more and more North America customers. Its sales number is breaking record all the time. Recently GN Solids America made another big movement, upgrading its warehouse with many shaker screen racks. After the upgrade, its storage capacity has become up to 6000 pieces and can guarantee customers more choices with even faster delivery.

mde

After the upgrade, GN will focus its replacement screen business on four main stream products in the market, DERRICK, MONGOOSE, NOV BRANDT, FLUID SYSTEM. All the shaker screens will adopt the latest composite frame, which will have similar performance to the OEM screens and even better longevity than the OEM screens. All the screens with API greater than 60 will be manufactured with 3 layers of wire mesh while other screen manufacturers will do 3 layers only when the API is greater than API 120. And GN is purchase the identical steel wire mesh from the supplier that also sold to DERRICK and MI SWACO screen. This can guarantee the quality of the screen similar to the OEM’s. The opening area is greater than the old screen by 10% to 20%. And since the frame is made of composite material, it’s much lighter, but the storage life is over 5 years. Except for the famous replacement screens, GN also provide its own OEM screen for GN’s shakers. And also GN can provide the customized screens to customers if the volume is large enough. GN will welcome you to test the screen and order it will save you a lot of cost.

Screen for Mongoose Shaker 2
All in all, GN’s screen will exceed your expectations and save you money. But the work performance will still be much better. Please log on to GN’s website www.gnsolidsamerica.com and send your inquiries to [email protected] .

written by GN Desander Desilter \\ tags: , , , ,

Oct 27

GN Solids America just finished upgrading the interior part of its Houston warehouse and now all the racks are in position. Now its inventory capacity has increased from 2000 pcs to 6000 pcs. And GN now has many main world famous brand replacement screens, such as MONGOOSE, KING COBRA, FLUID SYSTEMS, DERRICK, and so on.

Screen for Mongoose Shaker 2
GN now can manufacture the full product line in the solid control business area, including the shale shaker, decanter centrifuge, cutting dryer, mud cleaner, centrifugal pump, screw pump and various kinds of tanks. When you need anything in the solid control business, come to GN and this is your one stop shop. GN now also focused on the small consumable parts, such as the shaker screen. Now GN can manufacture all the screens as the composite frame, this screen has many greater features comparing to the old steel frame style. It has longer storage time up to 5 years without corrosion. It’s much lighter than the steel frame, one man can easily handle it on the oilfield and it’s much safer and easier to change it during work. The non blank area it 20% to 30% larger than the old steel frame, which means it will have much more processing capacity. And the wire mesh supplier is the same as the DERRICK, MI SWACO, this can guarantee GN’s screen’ quality will be similar to the OEM’s. But the longevity will be enhanced greatly, even much better than the OEM. And for GN’s screen,  if the API is above 60, there will be 3 layers, but other competitor’s screen will be 3 layers only when the API above 120.

mde

All in all, GN’s screen could be your number one choice and help you saving much more money. But the work performance will not yield a inch. Please log on to our website www.gnsolidsamerica.com and send your inquiries to [email protected] .

written by GN Desander Desilter \\ tags: , , , , ,

Sep 15

SPE Offshore Europe 2017 was just over last week from September 5-8 in Aberdeen, UK. This show was held every other year and is very famous in the offshore oil and gas industry in Europe. This year’s show is a little bit different, due to the terrible weather in Houston 2 weeks ago, many people’s house was destroyed by Hurricane Harvey. For a long time Houston and Aberdeen has established close relationship due to the important position of the 2 oil and gas cities. But this year there are still many exhibitors and attendees presenting in the show.

sdr

GN Solids Control also attended the show as the exhibitor and demonstrated its latest composite frame shaker screen. And recently GN also issued a new promotion policy, that is shaker screen points redeem policy. When you buy the composite frame screens manufactured by GN, you are eligible to get points, the accumulated points could be applied to redeem the money for purchase of solid control equipment, such as shale shaker, decanter centrifuge and cutting dryer. If you are interested in the details of the policy, please send email below and I will help you with that. Comparing to many other OEM shaker screens manufacturer’s products, GN’s composite frame replacement shaker screens have many advantages, such as working under the same mud and drilling conditions, it will have better longevity and very similar performance to the OEM screens. But the shaker screens cost could be much cheaper and save a lot of money for the operators. GN’s screen’s wire mesh supplier is the same as DERRICK and MI SWACO’s. This will guarantee the quality of the product. And GN’s screens are adopting 3 layers of wire mesh when the API No. is above 60, while the other manufacturers only adopt 3 layers when the API is above 120. Welcome to send you inquiry for the shaker screen to the email below and I will give you more details about the screen.

cof

Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected]

written by GN Desander Desilter \\ tags: , , ,

Sep 01

CBM ( Coal Bed Methane) is very useful resource for people’s daily life. In order to get it out from the underground, it will also need the drilling process. During drilling, it will also need the solid control and mud recycling. GN now can provide the full mud recycling system for the CBM application for the customers in the coal rich area, such as the Shanxi province in China, or the Michigan or Ohio in the US. The scale and size will not be as big as the one used in the oil and gas drilling, but the function and equipment used on the system are similar.

cof

The mud recycling system is mainly composed of the following equipment: 1, shale shaker which is 3 panel, linear motion for the coarse liquid and solid separation. The G force could reach up to 7.5 G at the flow rate of 500GPM. And now GN adopts the latest composite frame screens which will be more endurable, lighter and have more non-blank area. It’s more and more popular with the customers and the price stays almost the same as the old steel framed screens. 2, mud cleaner which is usually equipment with 1 desander, 8 desilter and a lower deck shaker. The mud will be separated further in the hydrocyclones and dries in the lower deck shaker screens. 3, 18 inch 452GNLW decanter centrifuge which could be configured both as the fixed speed or VFD variable speed. The surface of the screw and discharge port are protected by tough tungsten carbide tiles, and the bearings are made by world famous SKF. This product has been purchased by many big companies, such as BAKER HUGHES. 4, There mud tanks which will be used for mud mixing, recycling and intermediate transmission. All the system is equipped with necessary centrifugal pump and mixing hoppers.

cof

Welcome to visit our website www.gnsolidsamerica.com and get more information, send your inquiries to [email protected] . We believe GN could be your one stop shop for the solid control system and help your business to achieve great success.

written by GN Desander Desilter \\ tags: , , , , , , , , ,

Aug 25

GN Solids Control is one of the largest solid control and waste management companies which specializes in manufacturing the related equipment, such as shale shaker, desander, desilter, mud cleaner, vacuum degasser, mud gas separator, decanter centrifuge, agitator, centrifugal pump, cutting dryer, screw pump, shear pump, mud gun and so on. The cutting dryer and decanter centrifuge can be used for the large horsepower, such as 1500 HP drilling rig.

cof

Among all of GN’s products, the cutting dryer and decanter centrifuge are the star products as they have been in the market for a long time and very mature and reliable, many customers like them. There are two types of cutting dryer, fixed speed and VFD.There are three different kind of screens for your choice, 250 micron, 350 micron and 500 micron. The handling capacity is 30 to 50 tons per hour. The screen bowl’s maximum diameter is 930mm. The special design of high pressure air knife can clean the basket screen automatically and easily, and avoid the screen to be blinded by the viscosity mud and water based mud. The drilling mud will first come to the cutting dryer for the first degree separation to eliminate the greater solids. After being treating by the cutting dryer, the slurry will be transferred to the decanter centrifuge which can separate even smaller solids up to 20 micons. The decanter centrifuge is also using the centrifugal force to separate the solids and it works similarly to the cutting dryer. After the separation by the decanter centrifuge, the mud will be in great feature for reuse for the drilling work and will be ready to be pumped downhole.

160325GNCD930E
That’s the brief introduction about the cutting dryer and decanter centrifuge. Hopefully it will be useful to you. GN has many more solid control equipment, they can be used in different operational situations and help you achieve your target easily and cost effectively. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected]

written by GN Desander Desilter \\ tags: , , , ,

Aug 04

GN Solids Control is a world-famous company specializing in manufacturing drilling mud solid control and waste management and recycling. Its product range covers shale shaker, desander, desilter, vacuum degasser, decanter centrifuge, cutting dryer, centrifugal pump, screw pump and so on. Its products are mainly used in oil and gas drilling, civil works(like piling, TBM, HDD), and mining industry.

Oil Drilling Rig Gas Buster

Oil Drilling Rig Gas Buster

In the oil and gas drilling application, there is one important equipment in the solid control system, that is vacuum degasser. It is usually used after the shale shaker and before the mud cleaner. The main application of the degasser is to eliminate the gas immersed in the drilling mud, which will help restoring the mud weight, stabilizing the slurry viscosity, reducing the drilling cost, and preventing the well blow out accident. The vacuum degasser is mainly composed of vacuum tank installed on a skid base, vacuum pump, gas water separator, control panel, explosive proof motor. Its working principle is that: under the effect of the suction power from vacuum pump, negative pressure zone will be generated in the vacuum tank, and the drilling mud will enter the hollow shaft of the rotor through the suction tube under the effect of the atmospheric pressure. Then the mud will hit the windows of the hollow shaft and be sprayed to the wall of vacuum tank. Under the collision effect of the separation baffle, the mud will be separated into thin layers, and bubbles immersed in the mud will be broken up and comes out. The gas will be discharged by the vacuum pump and gas water separator to the safe zone, the mud will be discharged outside of the tank by impeller. In the whole process, the rotor will keep running at high speed under the power of main motor.

08.11 indonesia vaccum degasser
Now GN has two kinds of vacuum degasser: GNZCQ270A and GNZCQ360A, the processing capacity for these two equipment is 270m3/h and 360m3/h. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected]

written by GN Desander Desilter \\ tags: , , , ,

Jul 28

GN Solids Control is an integrated company for manufacturing the solid control system and waste management equipment and system. Established in 2007 in China, GN now has grown from a local Chinese company to an international company with its products sold to more than 60 countries. In 2014, GN set up its overseas subsidiaries in US and Russia to get closer to the local customer and better serve the local market.

cof

Among all the GN’s product line, there are there main ones which are more reliable, mature and popular in the market, they are shale shaker, decanter centrifuge and cutting dryer. As one of the key components in the solid control and waste management system, decanter centrifuge plays an important role in the solid and liquid separation process.
Among the Decanter centrifuge’s different specification and configurations, GNLW 363D is the most popular and reliable, it is the star product. There are fixed speed centrifuge and VFD controlled centrifuge. There are many highlights about the equipment: the bowl material is made from duplex stainless steel 2205 which is made by centrifugal casting, and it’s much better than stainless steel 304 and stainless steel 316. The solid waste discharge port is protected by special ceramic inserts which is made by world famous manufacturer with longer and more endurable life. The adjustable effluent port make the pond depth adjustment easier and more convenient and fast. The pneumatic controlled spring will make the opening of the cover more easily and safely. During the transportation, the bowl lifting bracket can perform as the protection for the bearings. The bearings are made by the world famous SKF company. The two motors are placed at one side of the equipment and make it smaller footprint. The conveyor surface is made from Tungsten carbide tiles which is more endurable and easy for maintenance. The VFD system is provided by ABB or SIEMENS. ATEX and IEC EX for zone 1 control panel can be provide as request.

2016-09-23-gn-centrifuge-for-food-industry-1
We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected] .

written by GN Desander Desilter \\ tags: , , , , ,

Jul 21

GN Solids America facility was first established in 2014 in Houston, TX. The facility is a multi functional with office, assembly center and spare parts center. The facility takes about 30,000 square feet. This office is the first overseas subsidiary for GN Solids Control and is performing the function as sales, after market service and warehousing.

Screen for Mongoose Shaker 2
Now in GN Solids America warehouse, there is plenty of shaker screen in stock. There are many types of screen there, such as the GN own brand GNZS series, replacement screens  for MI-SWACO MONGOOSE PRO, MONGOOSE PT and MEERKAT, ALS, BEM; replacement screens for DERRICK FLC 2000, FLC 500, DP 600, and hyperpool; replacement screens for NOV Brandt Cobra, King Cobra, Mini Cobra, Venom, LCM-2D, LCM-3D, VSM 300 series( include scalping, primary and secondary) and replacement screen for some other popular brand, such as Fluid System. GN Solids control can manufacture many types of screen, such as the composite frame, metal frame, soft hook strip and hard hook strip. The screen could be flat or pyramid according to customer’s requirement. The screen could be 2 layers or 3 layers depending on the customer’s requirement for the API number. The screen surface are made of stainless steel, usually use SS304 or SS316. This material can make the screen more endurable and work for longer time. GN can manufacture the screen from API 20 to API 400. GN Solids Control’s 2nd manufacturing facility is in production now. It will be about to produce about 5000 pieces of screens monthly. The screen frame will be mainly composite material. GN recommends our customer to use composite frame shaker screens because it’s lighter, has longer usage life, corrosion resistant and has larger non-blank area. Now GN screens have been sold to global market, we hope to get your inquiry soon.

cof

In order to give the customers the fastest lead time, now in GN’s warehouse in Houston, there are over 2000 pieces of shaker screens, 9 units of shale shakers, 1 set of cutting dryer, 3 sets of decanter centrifuge and 4 sets of mud cleaner, and also plenty of spare parts for equipment.
Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected]

written by GN Desander Desilter \\ tags: , , , , ,

Jun 30

Among all of GN’s product line, the mud recycling system for the drilling rig is a very popular and typical one. This system is with full stages of solid control equipment and large liquid storage tanks. Since its establishment in 2007, GN has already started manufacturing the solid control equipment for the oil and gas industry. After 10 years development, GN has already accumulated much experience and can be customer’s one stop shop for solid control system. Now its product range spanning from shale shakers, mud cleaners, decanter centrifuge, cutting dryer, vacuum degasser and so on.

750HPDrillingMudSystem
The mud recycling system is mainly composed of the following elements: there are 14 tanks in total used for mud recycling, storage and mixing and for water and fuel storage. There are 3 units of shale shakers which will be connected to the mud distributors that will distribute the drilling mud coming through the pipeline from the wellbore. There is also a mud gas separator to eliminate the flammable gas for safety purpose. And after the shale shaker, there is one vacuum degasser which will be used to remove the cut in gas in the mud to improve the efficiency of the centrifugal pump. After that is one mud cleaner which is composed of desander, desilter and underlying shale shaker. One decanter centrifuge is also equipped in the system for barite recovery. This can save the operator a lot of money as barite is very useful and expensive. There are also various pumps installed in the system to perform their function, such as the centrifugal pump which is used to transfer the drilling mud in the system. And there are also about 30 units of agitators and mud guns which will be used to clean the corners of the tank and mixing the mud in the tank to keep the mud property at good level.

2016.10.14 2000HP Drilling Rig Solids Control System
That’s the brief introduction about the mud recycling system. Hopefully it will be useful to you. GN has many types of configuration for different mud recycling system for different HP drilling rigs.  Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected] .

written by GN Desander Desilter \\ tags: , , , , ,

May 19

GN Solid Control’s product range now covers almost everything in the solid control area, such as the shale shaker, decanter centrifuge, mud cleaner, centrifugal pumps, shaker screens and so on. As people’s awareness of environmental protection is higher than before, the drilling waste must be handles and disposed properly instead of disposed freely. GN’s new drilling waste management system can help customers handle the waste in the right way in an economic way.

2016-12-23-drilling-waste-management-system-1
This system will be used for treating various kind of drilling slurries from the mud plant. The system mainly consists of the following components: 1) shale shaker, the shale shaker will be used for the first stage coarse separation for some big solids and cuttings. Now all GN’s shale shakers will be equipped with its latest shaker screens, which is made of composite frames. The composite shaker screen is lighter, more endurable and has more usable screen area. It is becoming more and more popular and will become the trend of the industry. 2) decanter centrifuge, now GN has many different sizes of centrifuge for your option: 14inch, 18 inch and 22 inch of bowl sizes could process different volume of slurries. All the bowls are made of stainless steels by duplex casting, the discharge port and screw conveyor surface are protected by tungsten carbide tiles. All these materials can make the centrifuge be used for longer time without much maintenance. 3) polymer dosing system, chemicals could be added to the system automatically by this, and PH value could be adjusted in order to have different drilling fluid features. With this function, the decanter centrifuge can separate even finer solids with the diameter smaller than 2 microns.

2016-12-23-drilling-waste-management-system
That’s the brief introduction about GN’s drilling waste management system. GN has many options for your requirement. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected] , GN could help you find the best solution for your project.

written by GN Desander Desilter \\ tags: , , , , , ,

займ на карту срочно без отказа онлайн займ на карту без отказа