займ на карту срочно без отказа займ онлайн
Nov 18

GN Solids Control is a world famous company and brand in the solids control and waste management industry. Now its business range spanning from shale shakers, mud cleaners, decanter centrifuge, cutting dryer, vacuum degasser and so on. GN could be your one stop shop in the solids control and waste management area. Its product application covers from oil and gas drilling, HDD and CBM drilling, bored pile and TBM drilling.

Mud Agitator
Today I will introduce two products, agitator and mud gun. As these two products are widely used in the mud mixing system in the oil and gas drilling, there are more and more customers showing their interest in them. So understanding them is very important. Let’s start with the agitator: GNJBQ075CD, GN means the company name in short. JBQ means the Chines product name of the agitator in short. 075 means 10 times of the pump’s power. The pump power is 7.5KW. C means this product is the third generation, and in future, GN will make more upgrades and improvements for the pump, there will be D, E etc. and more versions coming out. D means there are two impellers on the shaft, this is specially used when the tank is too deep and the shaft needs to be long, and the impeller quantity needs to be doubled to make the mud even.
Next let’s go to the mud gun: GNNJQ50A-3G(X), GN means the company name in short, NJQ means the product name mud gun in short. 50 means the nominal diameter is 50mm. A means it is the first generation. 3 means there are 3 nozzles on the mud gun. G means it’s fixed, X means it’s rotatory. Mud gun is widely used in the mud system to spray and flush the corner of the tank to avoid the solid collected in there.

Mud Agitator
That’s the basic introduction of the agitator and mud gun. Hopefully it will be useful to you. We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected]

written by GN Desander Desilter \\ tags: , , ,

Oct 13

WEFTEC 2017 was held in Chicago from Oct. 2-4. As the largest water treatment show in North America, WEFTEC attracted many experts, technicians and business staff in the water treatment industry from all around the world to Chicago to share technical idea and the past experience and development for the water treatment industry.
GN solids control is a fast growing manufacturer for the separation equipment. Most of the equipment are used in the water treatment and separation area to improve the water quality and meet the environmental requirement. This year, GN Solids America exhibited its 223 decanter centrifuge and 752 shale shaker. These two mini equipment mostly used in the mining industry. Though it’s the first time for GN appearing in the show, it do attract may attention from the visitors.

Screen for Mongoose Shaker 2
After many year’s development, GN’s decanter centrifuge has become a very mature product and many customers from the industry like it very much. The material of the bowl is made of the 2205 stainless steel which is very high grade and tough. The material in the liquid and solid discharge port is tungsten carbide, this material also can make the equipment tough and endurable. It needs less maintenance and saves the operators operation cost. The bearing is provided by famous brand SKF. The decanter centrifuge can separate the solid size from 2 to 5 microns. And the variable speed equipment is controlled by VFD system which means the processing speed and capacity could be changed according to the operator’s needs when it’s in operation. One more advantage about this decanter centrifuge is that the footprint is very compact and can work in very narrow space, and very flexible to move in the remote area.

030203
The other equipment GN showed is the mini shale shaker, usually the G force is about 7.5G. GN can also customize the configuration according to customer’s requirement. GN also manufactures the shale shaker screen. Now GN can manufacture both its own OEM screen, and also can manufacture all the famous replacement screens, from API 10 to 400. GN’s screens are upgraded to the advanced composite frame. Welcome to inquire from us for more details.
GN was very glad to meet you in Chicago. If you want to know more about GN’s product, please log on to www.gnsolidsamerica.com or you can send your inquiries to [email protected]

written by GN Desander Desilter \\ tags: , , , ,

Sep 01

CBM ( Coal Bed Methane) is very useful resource for people’s daily life. In order to get it out from the underground, it will also need the drilling process. During drilling, it will also need the solid control and mud recycling. GN now can provide the full mud recycling system for the CBM application for the customers in the coal rich area, such as the Shanxi province in China, or the Michigan or Ohio in the US. The scale and size will not be as big as the one used in the oil and gas drilling, but the function and equipment used on the system are similar.

cof

The mud recycling system is mainly composed of the following equipment: 1, shale shaker which is 3 panel, linear motion for the coarse liquid and solid separation. The G force could reach up to 7.5 G at the flow rate of 500GPM. And now GN adopts the latest composite frame screens which will be more endurable, lighter and have more non-blank area. It’s more and more popular with the customers and the price stays almost the same as the old steel framed screens. 2, mud cleaner which is usually equipment with 1 desander, 8 desilter and a lower deck shaker. The mud will be separated further in the hydrocyclones and dries in the lower deck shaker screens. 3, 18 inch 452GNLW decanter centrifuge which could be configured both as the fixed speed or VFD variable speed. The surface of the screw and discharge port are protected by tough tungsten carbide tiles, and the bearings are made by world famous SKF. This product has been purchased by many big companies, such as BAKER HUGHES. 4, There mud tanks which will be used for mud mixing, recycling and intermediate transmission. All the system is equipped with necessary centrifugal pump and mixing hoppers.

cof

Welcome to visit our website www.gnsolidsamerica.com and get more information, send your inquiries to [email protected] . We believe GN could be your one stop shop for the solid control system and help your business to achieve great success.

written by GN Desander Desilter \\ tags: , , , , , , , , ,

Jul 28

GN Solids Control is an integrated company for manufacturing the solid control system and waste management equipment and system. Established in 2007 in China, GN now has grown from a local Chinese company to an international company with its products sold to more than 60 countries. In 2014, GN set up its overseas subsidiaries in US and Russia to get closer to the local customer and better serve the local market.

cof

Among all the GN’s product line, there are there main ones which are more reliable, mature and popular in the market, they are shale shaker, decanter centrifuge and cutting dryer. As one of the key components in the solid control and waste management system, decanter centrifuge plays an important role in the solid and liquid separation process.
Among the Decanter centrifuge’s different specification and configurations, GNLW 363D is the most popular and reliable, it is the star product. There are fixed speed centrifuge and VFD controlled centrifuge. There are many highlights about the equipment: the bowl material is made from duplex stainless steel 2205 which is made by centrifugal casting, and it’s much better than stainless steel 304 and stainless steel 316. The solid waste discharge port is protected by special ceramic inserts which is made by world famous manufacturer with longer and more endurable life. The adjustable effluent port make the pond depth adjustment easier and more convenient and fast. The pneumatic controlled spring will make the opening of the cover more easily and safely. During the transportation, the bowl lifting bracket can perform as the protection for the bearings. The bearings are made by the world famous SKF company. The two motors are placed at one side of the equipment and make it smaller footprint. The conveyor surface is made from Tungsten carbide tiles which is more endurable and easy for maintenance. The VFD system is provided by ABB or SIEMENS. ATEX and IEC EX for zone 1 control panel can be provide as request.

2016-09-23-gn-centrifuge-for-food-industry-1
We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected] .

written by GN Desander Desilter \\ tags: , , , , ,

Jul 14

GN Solids Control is a leading company with its solid control and waste management business spanning all around the world. Established in 2007 in China, it’s always striving to provide the good quality product to the customer and help them saving cost. In 2014, GN Solids Control subsequently established its overseas office in US and Russia, to better serve the local customer and provide them the quick delivery and excellent after sales service. Now GN is an innovative company that is always striving to keep its products on the cutting edge of the industry.

TBM-Slurry-Separation-Plant
Now GN has four systems and TBM Slurry Separation Plant is one of them, today we will briefly introduce some of the compositions and features. GN’s TBM slurry separation plant is very efficient to process, separate and remove the excavated solids from the bentonite suspension- the mixture of water and thixotropic clay. And the cleaner fluid will be transferred back to the circulation system. The plant consists of shale shaker, desander, desilter, and decanter centrifuge. Now there are different sizes for the TBM slurry separation plant available, the small size includes: GNMS-500D (120m³/h), GNMS-1000D (240m³/h), GNMS-500M( 500m³/h), the large size includes: GNMS-9000M( 9000m³/h), GNMS-1200M(1200m³/h), GNMS-1400M (1400m³/h), GNMS-2000M (2000m³/h), GNMS-2800M (2800m³/h), GNMS-3600M(3600m³/h). The features of the plant that can benefit the customers are as below: all the equipment including shale shaker, desander, desilter and decanter centrifuge are OEM from GN. All the configurations can be customized according to customer’s working conditions and needs. GN has worldwide service network either from its own subsidiaries or its global partners. The high G shakers and high speed decanter centrifuges in the plant can provide high efficient and effective solid separation. Specially designed double deck shale shaker can increase the processing capacity with less footprint. All the equipment in the plants are modular designed and are easy to be moved for transportation or installation.

Dredge-Dewatering
That’s the brief introduction of the TBM slurry separation plant. Hopefully it will be useful  and helpful to you. GN has many more solid control systems, they can be used in different operational situations and help you achieve your target easily and cost effectively. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected]

written by GN Desander Desilter \\ tags: , , , , , ,

Jul 07

Solid control is very critical during the oil and gas drilling process, it will maintain the required property of the drilling mud and remove the low gravity solids from the liquid, and finally can make the drilling mud which could be reused and recycled in the drilling mud system. A good solid control process could increase the rate of penetration, reduce the wear and tear of the drilling equipment, such as the pistons, liners of the mud pump and allow for better hole cleaning.

Screen for Mongoose Shaker 2
GN’s solid control equipment can perform very well during the drilling process, and most of them are specially designed as compact, skid mounted and very mobile. One consumable part for the solid control equipment is the shale shaker screen. This year GN made a lot of effort in the improvement for the screens. GN launched its second facility specially for making the shaker screens of composite frame. Now GN has composite frame replacement screens available for MONGOOSE, KING COBRA/ VENOM, FLUID SYSTEM.
Now GN plans to promote its composite screens aggressively in North America, and it’s looking for new distributors. The ideal candidate will be an experienced one who has been in the solid control business for years, and has pretty mature distribution channel. So once combined GN’s composite screens with the distributor’s channel strength, it will quickly generate great revenues, and it will be a win-win situation. Better the candidate has many warehouses in different locations, especially in the key oil and gas basins. That will make us serve the local customers better. Once qualified, GN will give the candidate distributor great support, in terms of payment term, pricing, packaging, branding and so on. GN’s goal is going together with a great company to achieve great success.

mde

mde

That’s the brief introduction about GN’s screen strategy. GN would like to hear from you. Welcome to visit www.gnsolidsamerica.com and please send your ideas to [email protected] . GN believe together we will go far.

written by GN Desander Desilter \\ tags: , , ,

Jun 30

Among all of GN’s product line, the mud recycling system for the drilling rig is a very popular and typical one. This system is with full stages of solid control equipment and large liquid storage tanks. Since its establishment in 2007, GN has already started manufacturing the solid control equipment for the oil and gas industry. After 10 years development, GN has already accumulated much experience and can be customer’s one stop shop for solid control system. Now its product range spanning from shale shakers, mud cleaners, decanter centrifuge, cutting dryer, vacuum degasser and so on.

750HPDrillingMudSystem
The mud recycling system is mainly composed of the following elements: there are 14 tanks in total used for mud recycling, storage and mixing and for water and fuel storage. There are 3 units of shale shakers which will be connected to the mud distributors that will distribute the drilling mud coming through the pipeline from the wellbore. There is also a mud gas separator to eliminate the flammable gas for safety purpose. And after the shale shaker, there is one vacuum degasser which will be used to remove the cut in gas in the mud to improve the efficiency of the centrifugal pump. After that is one mud cleaner which is composed of desander, desilter and underlying shale shaker. One decanter centrifuge is also equipped in the system for barite recovery. This can save the operator a lot of money as barite is very useful and expensive. There are also various pumps installed in the system to perform their function, such as the centrifugal pump which is used to transfer the drilling mud in the system. And there are also about 30 units of agitators and mud guns which will be used to clean the corners of the tank and mixing the mud in the tank to keep the mud property at good level.

2016.10.14 2000HP Drilling Rig Solids Control System
That’s the brief introduction about the mud recycling system. Hopefully it will be useful to you. GN has many types of configuration for different mud recycling system for different HP drilling rigs.  Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected] .

written by GN Desander Desilter \\ tags: , , , , ,

Jun 23

Recently a full set of dewatering decanter centrifuge was bought by a South Korean customer to be used in the HDD and trenchless industry.
After 10 years development since its establishment in China, GN has now become an international company with a famous brand in the solid control equipment manufacturing area. Now it has 3 core products, drying shaker, decanter centrifuge and cutting dryer. This time the South Korean bought is just one of the core products GN manufactures.

cof

The decanter centrifuge has many great features. The bowl material is made of the stainless steel 2205, the screw conveyor surface is made of the tungsten carbide which is replaceable. The solid discharge port is also made of very tough material, either ceramic or tungsten carbide is commonly used. There are three types of power system, the VFD, fully hydraulic driven and fixed speed mechanical. The bowl size GN can manufacture is from 9 inch, 14 inch, 18 inch, 22 inch and the biggest one is 30 inch. So no matter how much your processing capacity will be, GN will have a right product for you.
The system for the decanter centrifuge also includes a screw pump which will feed the slurry into the decanter centrifuge. This system also includes a flocculant system, which can add some polymer to the mud and separate the solid size up to almost zero micron. If without the flocculant system, just using the mechanical force, the decanter centrifuge can separate the solid size from 2 to 5 microns.

sdr

Recently as the industry developed, the use of the decanter centrifuge in the HDD/ trenchless will become an industry trend. The construction company will need to get the drier solids and cleaner mud, and work more effectively and efficiently. Decanter centrifuge will be undoubtedly a good choice.
Welcome to log on to our website www.gnsolidscontrol.com and send your inquiries to [email protected] . Looking forward to more business with you.

written by GN Desander Desilter \\ tags: , ,

May 19

GN Solid Control’s product range now covers almost everything in the solid control area, such as the shale shaker, decanter centrifuge, mud cleaner, centrifugal pumps, shaker screens and so on. As people’s awareness of environmental protection is higher than before, the drilling waste must be handles and disposed properly instead of disposed freely. GN’s new drilling waste management system can help customers handle the waste in the right way in an economic way.

2016-12-23-drilling-waste-management-system-1
This system will be used for treating various kind of drilling slurries from the mud plant. The system mainly consists of the following components: 1) shale shaker, the shale shaker will be used for the first stage coarse separation for some big solids and cuttings. Now all GN’s shale shakers will be equipped with its latest shaker screens, which is made of composite frames. The composite shaker screen is lighter, more endurable and has more usable screen area. It is becoming more and more popular and will become the trend of the industry. 2) decanter centrifuge, now GN has many different sizes of centrifuge for your option: 14inch, 18 inch and 22 inch of bowl sizes could process different volume of slurries. All the bowls are made of stainless steels by duplex casting, the discharge port and screw conveyor surface are protected by tungsten carbide tiles. All these materials can make the centrifuge be used for longer time without much maintenance. 3) polymer dosing system, chemicals could be added to the system automatically by this, and PH value could be adjusted in order to have different drilling fluid features. With this function, the decanter centrifuge can separate even finer solids with the diameter smaller than 2 microns.

2016-12-23-drilling-waste-management-system
That’s the brief introduction about GN’s drilling waste management system. GN has many options for your requirement. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected] , GN could help you find the best solution for your project.

written by GN Desander Desilter \\ tags: , , , , , ,

May 12

Offshore Technology Conference (OTC) is just finished on May 4. During the show time from May 1-4, the exhibitors, visitors, professionals and students from all over the world attended the show, exchanged ideas and demonstrated the cutting edge technologies. Even though the industry is still at its downturn, people in the industry is still full of confidence and working hard to gain more and more opportunities and be successful.
GN Solids Control can manufacture almost all the solid control equipment and mud recycling system in the industry,  consistently exhibited in OTC this year.

2017 USA OTC GN
The two booth in one show can have double effect to attract more and more customers and attention. And reality has approved it’s true. GN gained even more opportunities after the show comparing the previous shows.
During OTC, GN demonstrated its latest products: including the latest shale shaker, 363 decanter centrifuge, cutting dryer and many upgraded composite shale shaker screens. GN’s shale shaker was liked by most customers for its good G force performance, great processing capacity and it fantastic longivity. During the show many visitors and customers found more new features from the latest shale shaker and they really like it. And they showed interest in buying one in future when the new project coming in. The decanter centrifuge is also very popular at OTC. Up to now GN has manufactured 3 types: VFD version, fixed speed mechanical version, and the hydraulic power controlled decanter centrifuge. The full product line will definitely attract more customer’s attention, meet more customer’s requirement. GN also continued to show the cutting dryer after last year’s demonstration, this product has great performance in processing the cuttings and solids waste, making them more dryer and environmental friendly, and could make the waste directly be disposed without harm to the environment.

2017 GN OTC
Last but not least, GN demonstrated its strategic product for 2017- the shale shaker screens. Now GN has greatly improved its manufacturing process and could make the composite frame screens which has more advantages and great features than the old metal framed screens. Many customers and visitors were impressed by the great new shale shaker screen and plan to place some orders.
OTC 2017 is over, but GN will continuously provide the good quality and reliable products to its most valued customers and save money for the customers.

written by GN Desander Desilter \\ tags: , , , , ,

займ на карту срочно без отказа онлайн займ на карту без отказа