займ на карту срочно без отказа займ онлайн
Aug 25

GN Solids Control is one of the largest solid control and waste management companies which specializes in manufacturing the related equipment, such as shale shaker, desander, desilter, mud cleaner, vacuum degasser, mud gas separator, decanter centrifuge, agitator, centrifugal pump, cutting dryer, screw pump, shear pump, mud gun and so on. The cutting dryer and decanter centrifuge can be used for the large horsepower, such as 1500 HP drilling rig.

cof

Among all of GN’s products, the cutting dryer and decanter centrifuge are the star products as they have been in the market for a long time and very mature and reliable, many customers like them. There are two types of cutting dryer, fixed speed and VFD.There are three different kind of screens for your choice, 250 micron, 350 micron and 500 micron. The handling capacity is 30 to 50 tons per hour. The screen bowl’s maximum diameter is 930mm. The special design of high pressure air knife can clean the basket screen automatically and easily, and avoid the screen to be blinded by the viscosity mud and water based mud. The drilling mud will first come to the cutting dryer for the first degree separation to eliminate the greater solids. After being treating by the cutting dryer, the slurry will be transferred to the decanter centrifuge which can separate even smaller solids up to 20 micons. The decanter centrifuge is also using the centrifugal force to separate the solids and it works similarly to the cutting dryer. After the separation by the decanter centrifuge, the mud will be in great feature for reuse for the drilling work and will be ready to be pumped downhole.

160325GNCD930E
That’s the brief introduction about the cutting dryer and decanter centrifuge. Hopefully it will be useful to you. GN has many more solid control equipment, they can be used in different operational situations and help you achieve your target easily and cost effectively. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected]

written by GN Desander Desilter \\ tags: , , , ,

Aug 04

GN Solids Control is a world-famous company specializing in manufacturing drilling mud solid control and waste management and recycling. Its product range covers shale shaker, desander, desilter, vacuum degasser, decanter centrifuge, cutting dryer, centrifugal pump, screw pump and so on. Its products are mainly used in oil and gas drilling, civil works(like piling, TBM, HDD), and mining industry.

Oil Drilling Rig Gas Buster

Oil Drilling Rig Gas Buster

In the oil and gas drilling application, there is one important equipment in the solid control system, that is vacuum degasser. It is usually used after the shale shaker and before the mud cleaner. The main application of the degasser is to eliminate the gas immersed in the drilling mud, which will help restoring the mud weight, stabilizing the slurry viscosity, reducing the drilling cost, and preventing the well blow out accident. The vacuum degasser is mainly composed of vacuum tank installed on a skid base, vacuum pump, gas water separator, control panel, explosive proof motor. Its working principle is that: under the effect of the suction power from vacuum pump, negative pressure zone will be generated in the vacuum tank, and the drilling mud will enter the hollow shaft of the rotor through the suction tube under the effect of the atmospheric pressure. Then the mud will hit the windows of the hollow shaft and be sprayed to the wall of vacuum tank. Under the collision effect of the separation baffle, the mud will be separated into thin layers, and bubbles immersed in the mud will be broken up and comes out. The gas will be discharged by the vacuum pump and gas water separator to the safe zone, the mud will be discharged outside of the tank by impeller. In the whole process, the rotor will keep running at high speed under the power of main motor.

08.11 indonesia vaccum degasser
Now GN has two kinds of vacuum degasser: GNZCQ270A and GNZCQ360A, the processing capacity for these two equipment is 270m3/h and 360m3/h. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected]

written by GN Desander Desilter \\ tags: , , , ,

Jul 28

GN Solids Control is an integrated company for manufacturing the solid control system and waste management equipment and system. Established in 2007 in China, GN now has grown from a local Chinese company to an international company with its products sold to more than 60 countries. In 2014, GN set up its overseas subsidiaries in US and Russia to get closer to the local customer and better serve the local market.

cof

Among all the GN’s product line, there are there main ones which are more reliable, mature and popular in the market, they are shale shaker, decanter centrifuge and cutting dryer. As one of the key components in the solid control and waste management system, decanter centrifuge plays an important role in the solid and liquid separation process.
Among the Decanter centrifuge’s different specification and configurations, GNLW 363D is the most popular and reliable, it is the star product. There are fixed speed centrifuge and VFD controlled centrifuge. There are many highlights about the equipment: the bowl material is made from duplex stainless steel 2205 which is made by centrifugal casting, and it’s much better than stainless steel 304 and stainless steel 316. The solid waste discharge port is protected by special ceramic inserts which is made by world famous manufacturer with longer and more endurable life. The adjustable effluent port make the pond depth adjustment easier and more convenient and fast. The pneumatic controlled spring will make the opening of the cover more easily and safely. During the transportation, the bowl lifting bracket can perform as the protection for the bearings. The bearings are made by the world famous SKF company. The two motors are placed at one side of the equipment and make it smaller footprint. The conveyor surface is made from Tungsten carbide tiles which is more endurable and easy for maintenance. The VFD system is provided by ABB or SIEMENS. ATEX and IEC EX for zone 1 control panel can be provide as request.

2016-09-23-gn-centrifuge-for-food-industry-1
We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected] .

written by GN Desander Desilter \\ tags: , , , , ,

Jul 07

Solid control is very critical during the oil and gas drilling process, it will maintain the required property of the drilling mud and remove the low gravity solids from the liquid, and finally can make the drilling mud which could be reused and recycled in the drilling mud system. A good solid control process could increase the rate of penetration, reduce the wear and tear of the drilling equipment, such as the pistons, liners of the mud pump and allow for better hole cleaning.

Screen for Mongoose Shaker 2
GN’s solid control equipment can perform very well during the drilling process, and most of them are specially designed as compact, skid mounted and very mobile. One consumable part for the solid control equipment is the shale shaker screen. This year GN made a lot of effort in the improvement for the screens. GN launched its second facility specially for making the shaker screens of composite frame. Now GN has composite frame replacement screens available for MONGOOSE, KING COBRA/ VENOM, FLUID SYSTEM.
Now GN plans to promote its composite screens aggressively in North America, and it’s looking for new distributors. The ideal candidate will be an experienced one who has been in the solid control business for years, and has pretty mature distribution channel. So once combined GN’s composite screens with the distributor’s channel strength, it will quickly generate great revenues, and it will be a win-win situation. Better the candidate has many warehouses in different locations, especially in the key oil and gas basins. That will make us serve the local customers better. Once qualified, GN will give the candidate distributor great support, in terms of payment term, pricing, packaging, branding and so on. GN’s goal is going together with a great company to achieve great success.

mde

mde

That’s the brief introduction about GN’s screen strategy. GN would like to hear from you. Welcome to visit www.gnsolidsamerica.com and please send your ideas to [email protected] . GN believe together we will go far.

written by GN Desander Desilter \\ tags: , , ,

May 26

GN solid control was established for more than 10 years, now it has developed from just manufacturing one or two kinds of solid control equipment to covering almost all the solid control equipment, including shale shaker, desander, desilter, mud cleaner, vacuum degasser, mud gas separator, decanter centrifuge, agitator, centrifugal pump, cutting dryer, screw pump, shear pump, mud gun and so on. GN has successfully diversified its product line. After 10 years development, GN has promoted its products to over 60 countries and now it also established two overseas subsidiaries, US and Russia.

solids-removal-unit
Recently GN released its four solid control systems and today we will introduce one of them, it is Solids Removal Unit for mining industry. The Solids Removal Unit (SRU) is mainly used in the drilling fluids and solids control for the small size mining rigs for the diamond drilling. The solids removal units can provide the cost effective solution for the solids removal, reduced the environmental impact to the minimum level and greatly improved the efficiency for the diamond drilling. So it’s highly appraised by the drilling experts as the future of the diamond drilling industry. The Solids removal unit is a closed loop for drilling fluid and solid process system. It contains mini shale shaker, mini decanter centrifuge (This is GN’s 223 centrifuge which is the world’s smallest.), pumps, mixing tanks and generators(optional). The working theory is simple, the drilling fluid will be circulated from the wellbore and went onto the shale shaker for coarse screening, the fluids will flow down to the tank and be pumped up by another feeding pump into the decanter centrifuge for finer screening. And the cleaner fluid will be recirculated into the well for drilling. There are also mixing hopper, chamber and pumps making the adding of chemical easy.

2016-09-14-gn-solids-removel-unit-for-international-customer-2
That’s the brief introduction of the SRU system. Hopefully it will be useful  and helpful to you. GN has many more solid control systems, they can be used in different operational situations and help you achieve your target easily and cost effectively.
All the customers can log on to our US website www.gnsolidsamerica.com and we will wait to see your inquiries in [email protected] .

written by GN Desander Desilter \\ tags: , , , , , , ,

May 19

GN Solid Control’s product range now covers almost everything in the solid control area, such as the shale shaker, decanter centrifuge, mud cleaner, centrifugal pumps, shaker screens and so on. As people’s awareness of environmental protection is higher than before, the drilling waste must be handles and disposed properly instead of disposed freely. GN’s new drilling waste management system can help customers handle the waste in the right way in an economic way.

2016-12-23-drilling-waste-management-system-1
This system will be used for treating various kind of drilling slurries from the mud plant. The system mainly consists of the following components: 1) shale shaker, the shale shaker will be used for the first stage coarse separation for some big solids and cuttings. Now all GN’s shale shakers will be equipped with its latest shaker screens, which is made of composite frames. The composite shaker screen is lighter, more endurable and has more usable screen area. It is becoming more and more popular and will become the trend of the industry. 2) decanter centrifuge, now GN has many different sizes of centrifuge for your option: 14inch, 18 inch and 22 inch of bowl sizes could process different volume of slurries. All the bowls are made of stainless steels by duplex casting, the discharge port and screw conveyor surface are protected by tungsten carbide tiles. All these materials can make the centrifuge be used for longer time without much maintenance. 3) polymer dosing system, chemicals could be added to the system automatically by this, and PH value could be adjusted in order to have different drilling fluid features. With this function, the decanter centrifuge can separate even finer solids with the diameter smaller than 2 microns.

2016-12-23-drilling-waste-management-system
That’s the brief introduction about GN’s drilling waste management system. GN has many options for your requirement. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected] , GN could help you find the best solution for your project.

written by GN Desander Desilter \\ tags: , , , , , ,

May 12

Offshore Technology Conference (OTC) is just finished on May 4. During the show time from May 1-4, the exhibitors, visitors, professionals and students from all over the world attended the show, exchanged ideas and demonstrated the cutting edge technologies. Even though the industry is still at its downturn, people in the industry is still full of confidence and working hard to gain more and more opportunities and be successful.
GN Solids Control can manufacture almost all the solid control equipment and mud recycling system in the industry,  consistently exhibited in OTC this year.

2017 USA OTC GN
The two booth in one show can have double effect to attract more and more customers and attention. And reality has approved it’s true. GN gained even more opportunities after the show comparing the previous shows.
During OTC, GN demonstrated its latest products: including the latest shale shaker, 363 decanter centrifuge, cutting dryer and many upgraded composite shale shaker screens. GN’s shale shaker was liked by most customers for its good G force performance, great processing capacity and it fantastic longivity. During the show many visitors and customers found more new features from the latest shale shaker and they really like it. And they showed interest in buying one in future when the new project coming in. The decanter centrifuge is also very popular at OTC. Up to now GN has manufactured 3 types: VFD version, fixed speed mechanical version, and the hydraulic power controlled decanter centrifuge. The full product line will definitely attract more customer’s attention, meet more customer’s requirement. GN also continued to show the cutting dryer after last year’s demonstration, this product has great performance in processing the cuttings and solids waste, making them more dryer and environmental friendly, and could make the waste directly be disposed without harm to the environment.

2017 GN OTC
Last but not least, GN demonstrated its strategic product for 2017- the shale shaker screens. Now GN has greatly improved its manufacturing process and could make the composite frame screens which has more advantages and great features than the old metal framed screens. Many customers and visitors were impressed by the great new shale shaker screen and plan to place some orders.
OTC 2017 is over, but GN will continuously provide the good quality and reliable products to its most valued customers and save money for the customers.

written by GN Desander Desilter \\ tags: , , , , ,

May 12

Recently a full 40 feet container of  Mongoose shaker screens were shipped from China headquarter to US warehouse. And it will arrive in Houston by early May. This means GN will continue to set the shaker screen as one of its strategic products during the industry’s downturn.
The full container of shaker screens are all composite frames. Theses screens are all manufactured from GN’s new facility, the No. 2 facility. This facility just newly opened and equipped with modern machinery, and mainly focused on manufacturing the composite frame screens. Now the manufacturing capability will be like 5000 pieces per month which can meet the customer’s requirement for quick delivery but lower prices. Now the production of the shaker screens in China has realized the large scale, which means the quality, productivity and efficiency have all been improved dramatically. All the screens will be packed in a paper carton, then they will be placed into crates which are easily moved by forklift.

Screen for Mongoose Shaker 2
Now GN’s shaker screens have a wide category range, from its own OEM screen, to the replacement screens for DERRICK 500 series, 2000 series, Dual pool, Hyper pool, Mongoose/Meercat, King Cobra/ Venom, Fluid Systems, Elgin and so on. If a customer need some screen that GN doesn’t usually make, GN can also customize the screens as the customer’s request, just let GN know the dimension or better take a picture, GN will customize the screen with 100 percent satisfaction for the customer. And GN’s new composite screens have some new great features, the screen will be much lighter than the old metal frame, there will be more non-blank area, it will be more endurable, there are 3 layers of mesh. They are all four side tensioned and all the layers of mesh will be combined together very well without having too much gap between each layer.

mde

mde

Above is the brief introduction about the shaker screens. If you are interested in it, welcome to visit our website www.gnsolidsamerica.com and get more information, please send your inquiries to [email protected] .

written by GN Desander Desilter \\ tags: , ,

Apr 27

GN Solids Control’s good quality products are recognized by more and more European and American customers. Recently an European customer placed another order including shale shaker, mud cleaner and decanter centrifuge. These equipment will be finished recently and shipped to Europe to work on the customer’s oilfield job site.

dav

GN Solids Control is a specialized equipment manufacturer whose products cover almost everything in the solid control area, including the shale shaker, decanter centrifuge, cutting dryer, mud cleaner, centrifugal pump and so on. Now GN has two kinds of shale shaker, the regular shaker and the High G shaker. The High G shaker has more shaking power and can make the solids and cuttings drier to meet the environmental requirement for disposal. The shaker can have 2 panels, 3 panels, and 4 panels of shale shaker screen. Now GN has fully upgraded its shaker screens from the old metal style to the new composite frame style, including the popular MONGOOSE, KING COBRA, DERRICK, FLUID SYSTEM screens. These new composite screens have longer working life, more opening area and much lighter. The mud cleaner is working as the combination of shale shaker, desander, desilter. It can separate the solid size to 10 to 20 microns. There are two types of cyclones, one is 4 inch, the other is 10 inch. The decanter centrifuge can separate the solid size to 2 to 5 microns. The decanter centrifuge bowl size can range from 9 inch, 14 inch, 18 inch, 22 inch, and 30 inch. The customer can choose the different sizes per their different requirement, the different applications could be mining, diamond drilling, HDD, trenchless or oil and gas drilling. From the performance and the material of the decanter centrifuge, this must be a cost effective product, and more and more customers like it .

cof
Welcome to visit www.gnsolidscontrol.com to get more info and send your inquiry to [email protected]

written by GN Desander Desilter \\ tags: , , , ,

Apr 23

OTC (Offshore Technology Conference) will be held in the oil and gas headquarter-Houston- on May 1-4, 2017 in NRG Park. Founded in 1969, OTC Houston will be held annually as the flagship show and will attract the energy professionals from all over the world to come to Houston to exchange the energy perspectives and find some new opportunities for business and for technology development.
GN Solids Control, as the leading solid control equipment and mud recycling system manufacturer, will consistently exhibit in OTC this year. This year GN Solids Control will have two booths, the info is as below:
No. 1 booth, NRG Center 1369-6
No.2 booth, NRG Arena 8834
Welcome to visit GN’s booths and get the latest product and technology info.

2017 GN OTC
During OTC, GN will demonstrate its lasted products: including the latest shale shaker, 363 decanter centrifuge, cutting dryer and many upgraded composite shale shaker screens. GN’s shale shaker is always popular with customers for its great G force performance, large processing capacity and it durability. We believe you will find more new features at the OTC from the latest shale shaker. The decanter centrifuge is also very popular at OTC. Till now GN has 3 types: VFD version, fixed speed mechanical version, and the hydraulic power controlled decanter centrifuge. The full product line will definitely attract more customer’s attention, meet more customer’s requirement. GN will also continue to show the cutting dryer after last year’s demonstration, this product has great performance in processing the cuttings and solids waste, making them more dryer and environmental friendly, and could make the waste directly disposed.

2017 USA OTC GN
Last but not least, GN will demonstrate its strategic product for 2017- the shale shaker screen. Now GN has greatly improved its manufacturing process and could make the composite frame screens which has more advantages and great features than the old metal framed screens. Welcome to GN’s booth and feel it personally. We believe you will be impressed by the great new shale shaker screen.
We will look forward to meeting you in Houston in May.

written by GN Desander Desilter \\ tags: , , , ,

займ на карту срочно без отказа онлайн займ на карту без отказа