займ на карту срочно без отказа займ онлайн
May 12

Offshore Technology Conference (OTC) is just finished on May 4. During the show time from May 1-4, the exhibitors, visitors, professionals and students from all over the world attended the show, exchanged ideas and demonstrated the cutting edge technologies. Even though the industry is still at its downturn, people in the industry is still full of confidence and working hard to gain more and more opportunities and be successful.
GN Solids Control can manufacture almost all the solid control equipment and mud recycling system in the industry,  consistently exhibited in OTC this year.

2017 USA OTC GN
The two booth in one show can have double effect to attract more and more customers and attention. And reality has approved it’s true. GN gained even more opportunities after the show comparing the previous shows.
During OTC, GN demonstrated its latest products: including the latest shale shaker, 363 decanter centrifuge, cutting dryer and many upgraded composite shale shaker screens. GN’s shale shaker was liked by most customers for its good G force performance, great processing capacity and it fantastic longivity. During the show many visitors and customers found more new features from the latest shale shaker and they really like it. And they showed interest in buying one in future when the new project coming in. The decanter centrifuge is also very popular at OTC. Up to now GN has manufactured 3 types: VFD version, fixed speed mechanical version, and the hydraulic power controlled decanter centrifuge. The full product line will definitely attract more customer’s attention, meet more customer’s requirement. GN also continued to show the cutting dryer after last year’s demonstration, this product has great performance in processing the cuttings and solids waste, making them more dryer and environmental friendly, and could make the waste directly be disposed without harm to the environment.

2017 GN OTC
Last but not least, GN demonstrated its strategic product for 2017- the shale shaker screens. Now GN has greatly improved its manufacturing process and could make the composite frame screens which has more advantages and great features than the old metal framed screens. Many customers and visitors were impressed by the great new shale shaker screen and plan to place some orders.
OTC 2017 is over, but GN will continuously provide the good quality and reliable products to its most valued customers and save money for the customers.

written by GN Desander Desilter \\ tags: , , , , ,

Apr 23

OTC (Offshore Technology Conference) will be held in the oil and gas headquarter-Houston- on May 1-4, 2017 in NRG Park. Founded in 1969, OTC Houston will be held annually as the flagship show and will attract the energy professionals from all over the world to come to Houston to exchange the energy perspectives and find some new opportunities for business and for technology development.
GN Solids Control, as the leading solid control equipment and mud recycling system manufacturer, will consistently exhibit in OTC this year. This year GN Solids Control will have two booths, the info is as below:
No. 1 booth, NRG Center 1369-6
No.2 booth, NRG Arena 8834
Welcome to visit GN’s booths and get the latest product and technology info.

2017 GN OTC
During OTC, GN will demonstrate its lasted products: including the latest shale shaker, 363 decanter centrifuge, cutting dryer and many upgraded composite shale shaker screens. GN’s shale shaker is always popular with customers for its great G force performance, large processing capacity and it durability. We believe you will find more new features at the OTC from the latest shale shaker. The decanter centrifuge is also very popular at OTC. Till now GN has 3 types: VFD version, fixed speed mechanical version, and the hydraulic power controlled decanter centrifuge. The full product line will definitely attract more customer’s attention, meet more customer’s requirement. GN will also continue to show the cutting dryer after last year’s demonstration, this product has great performance in processing the cuttings and solids waste, making them more dryer and environmental friendly, and could make the waste directly disposed.

2017 USA OTC GN
Last but not least, GN will demonstrate its strategic product for 2017- the shale shaker screen. Now GN has greatly improved its manufacturing process and could make the composite frame screens which has more advantages and great features than the old metal framed screens. Welcome to GN’s booth and feel it personally. We believe you will be impressed by the great new shale shaker screen.
We will look forward to meeting you in Houston in May.

written by GN Desander Desilter \\ tags: , , , ,

Apr 13

In recent years, mud recycling system is more and more used in the solid control projects, such as the HDD, trenchless or civil works. The mud recycling can greatly improve the efficiency of the work and keep the mud feature at the good level for continuous work. GN also sold more and more mud recycling systems in recent years.

2016-12-23-drilling-waste-management-system-1
Just several months ago, GN Solids Control sold one set of mud recycling system to a UK customer for civil works. This system consists of a double deck shale shaker and a decanter centrifuge. The shale shaker is used for coarse separation to eliminate the large size solids. The screens on the upper deck will have smaller API number than the lower deck, which means the lower deck screen could separate finer solids than the upper deck screen. Then the processed fluids will drop to the tank and then pumped by a screw pump to the decanter centrifuge for further separation. The decanter centrifuge can separate the solid size up to 20 microns. The centrifuge is built tough and need less maintenance during normal operation. The bowl is made of duplex casting 2205 stainless steel, the bearing is made by world famous SKF, the screw conveyor and discharge port are protected by tungsten carbide tiles. There is also tough cover the spring to protect the decanter centrifuge during transportation. And after this separation, the mud could go back to the system to be reused again. This will be very environmental and cost effective. GN can customize the mud recycling system according  to customer’s different requirement and give customer the best solution.

2016-12-23-drilling-waste-management-system
That’s the basic introduction of the mud system. Hopefully you will be interested in it. GN has many more solid control systems, they can be used in different operational situations and help you achieve your target easily and cost effectively. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected]

written by GN Desander Desilter \\ tags: , , , ,

Apr 07

GN Solids Control is an international company with its solid control and waste management business spanning all around the world. Established in 2007 in China, it’s always striving to provide the good quality product to the customer and help them saving cost. In 2014, GN Solids Control subsequently established its overseas office in US and Russia, to better serve the local customer and provide them the quick delivery and excellent after sales service. Now GN not only manufacture every single solid control equipment, but also can provide the customers with solutions and solid control system.

2016-12-23-drilling-waste-management-system
The liquid mud system is one of its systems which mainly used in onshore or offshore to keep the mud properties as good as possible during the mud is circulating in the wellbore. The liquid mud system is mainly composed of the following equipment, shale shaker, mud agitator, mud gun, centrifugal pump, mud mixing hopper, decanter centrifuge and various kinds of mud tanks. The type of mud tanks includes oil based mud tank, water based mud tank, base oil tank, barite tank, water tank, mud mixing tank and bulk tank. Each tank has its own special functions and will be deployed in different operation situations. GN’s shale shaker is mostly in linear motion and is used for the coarse separation. It mainly separate the solids by its size by the screen. For the screens, GN now can manufacture its OEM screen with GN brand, also it can manufacture some famous replacement screens, such as DERRICK, MI-SWACO and BRANDT. Now GN can manufacture and supply all the components with high quality and low cost.

solids-removal-unit
That’s the basic introduction of the mud system. Hopefully you will be interested in it. GN has many more solid control systems, they can be used in different operational situations and help you achieve your target easily and cost effectively. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected]

written by GN Desander Desilter \\ tags: , , ,

Mar 10

GN Solids Control is an integrated company for manufacturing the solid control system and waste management equipment and system. Established in 2007 in China, GN now has grown from a local Chinese company to an international company with its products sold to more than 60 countries. In 2014, GN opened its overseas offices in US and Russia to better serve the local customer and provide more products to the local customers.

2016-09-23-gn-centrifuge-for-food-industry-1
In the GN’s product line, there are some main products which are more reliable, mature and popular in the market, which are shale shaker, decanter centrifuge and cutting dryer. As one of the key elements in the solid control and waste management system, decanter centrifuge plays an important role in the solid and liquid separation process. And it could separate finer solids than other solid control equipment.

160325GNLW363DG
There are many different specification and configurations in GN’s centrifuge line, GNLW 363C is the most popular and reliable, it is the core product.  The fixed speed and VFD controlled are two types of centrifuge that GN can manufacture at the moment. The great features about the centrifuge are as below: the bowl material is made from duplex stainless steel 2205 which is formed by centrifugal casting, and it’s much better than the traditional stainless steel 304 and 316. The solid waste discharge port is protected by special ceramic inserts which is manufactured by world famous brand company with longer and more endurable life. The adjustable effluent port make the pond depth adjustment easier and more convenient and fast. The pneumatic controlled spring will make the opening of the cover more easily and safely. During the transportation, the bowl lifting bracket can perform as the protection for the bearings. The bearings are made by the world famous SKF company. The two motors are placed at one side of the equipment and make it smaller footprint. The conveyor surface is made from Tungsten carbide tiles which is more endurable and easy for maintenance. The VFD system is provided by ABB or SIEMENS. ATEX and IEC EX for zone 1 control panel can be provide as request.
We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected]

written by GN Desander Desilter \\ tags: , , , ,

Jan 26

Drilling mud is very important to the oil and gas drilling process like the blood to human body. In the mud, there are many valuable elements, such as the barite. How to well manage the drilling mud is critical to all the operators and can save a lot of money if it’s managed reasonably. The solid control system manufactured by GN represents the lasted design and technology in the industry. It can effectively and efficiently recovered the drilling mud and make it reusable.

2016.10.14 2000HP Drilling Rig Mud System
GN’s solid control system for oil and gas drilling is mainly composed of the following equipment: 1, shale shaker, usually there will be 3 which will be connected to the mud distribution system to get the evenly distributed mud. At this stage, the mud will be coarsely separated and then it will goes to the next stage. 2, vacuum degasser which will be used for discharge the cut in gas in the mud. The centrifugal pump will worked as the feeding pump for the vacuum degasser. 3, desander, desilter which will further eliminate the find solids from the mud by the hydrocyclones. The centrifugal pump will also feed them with mud. 4, decanter centrifuge which will be mainly used for recovering the expensive barite. The decanter centrifuge is very tough and need less maintenance, as the screw is made of stainless steel 2205 and the surface of screw and discharge port is made of tungsten carbide tiles. 5, Mud tanks will be separated into several different compartments for different use, such as mud mixing, intermediate transmission, reserving and so on. 6, There are also many auxiliary parts, such as the agitator which will continuously stiring the mud to make sure it’s even. The mud gun which will be used to clean the corner of the tank to avoid the residue of the solid accumulated there.

2016.10.14 2000HP Drilling Rig Solids Control System
Here is the brief introduction of the solid control system for the oil and gas drilling. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected] We will try our best to help your business achieving great success.

written by GN Desander Desilter \\ tags: , , , , , ,

Jan 06
As the growing global demand for energy, there will be more and more development activities for fossil fuels. So how to keep the environment not to be polluted during the drilling process? That will need to improve the solid control technology and will need more solid control equipment globally.
2015_gn_solids_china
As the leading company in the solid control and waste management business area, GN solids Control was established in 2007 in China. With many years’ development, GN Solids control has become an international company with products sold to more than 60 countries. The product range covers shale shaker, desander, desilter, mud cleaner, decanter centrifuge, cutting dryer and so on. GN Solids Control can become your one stop shop in the drilling solid control area.
North America is always considered to be the place with heavy regulation about the environment. The improvement in technologies has enabled many companies to reduce the expensive drilling fluid losses. This save a lot of money for a lot of companies. At the same time, the technology improvement also needs to be more environmental friendly, and the equipment can guarantee the oilfield disposal can meet the environmental standard. So the direction of the solid control equipment will be development in the direction of more efficient and more environmental friendly. As the rigs will work faster, more efficient and intensive, the solid control companies will need to develop the higher capacity shale shakers, bigger decanter centrifuges, better and more endurable screen designs and make the work process more streamlined.
GN Solids control is a high-tech and innovative equipment manufacture.  It’s never given up the technology innovation and improvement, we can see this from the frequency of its product to be updated, every 2-3 years, GN will release new version of some of its main product line. This will keep GN always on the cutting edge of the industry. Now it’s estimated that by 2019 the North America market for solid control equipment will reach $1.23 billion and global market will be worth $2.65 billion. We believe you will see more and more GN solid control equipment on the market.
Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected] .
2016-12-23-drilling-waste-management-system

written by GN Desander Desilter \\ tags: , , , ,

Dec 23

Recently as the OPEC members have agreed to reduce the production of crude oil, the international crude oil price is gradually picking up and we can also see from the BAKER HUGHES weekly rig count report that the rig numbers is growing up week by week. GN believe in the coming 2017, we will see more opportunities in the oil and gas industry. So today we will introduce again one of its mature mud recycling system for 1500 HP drilling rig system- the mud recycling system for oil and gas drilling.

750HPDrillingMudSystem
The mud recycling system consists of the following key components, shale shaker, mud gas separator, vacuum degasser, decanter centrifuge, centrifugal pump, agitator, mud cleaner( sometimes it is desander or desilter), mud gun and so on. The system works like this: first the mud coming from the wellbore will go through the pipeline to the mud distributor connecting to the shale shakers, then the shale shaker will do the coarse separation and discharge the large solids out of the system. The fine mud will go to the vacuum degasser to eliminate the cut in gas which will make the mud recycling working more effectively and efficiently. Then the mud will go to the tank and pumped into the mud cleaner. The mud cleaner the separate the solid size from 40-60 microns. Then the feed pump will suck the finer mud from the mud cleaner to the decanter centrifuge which will be mainly used for recovering the barite. The barite is a very important element for the drilling mud, it will increase the mud gravity and keep the mud working in a good level of property. The mud gun and agitator will be allocated in different tanks to keep the mud even and solid not dropping down into the tank corner. This is a very mature and reliable mud recycling system. It has been used by customers all around the world.

1500 gpm mud recycling system
That is the basic introduction about the mud recycling system, If you have some further interest, welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected] .

written by GN Desander Desilter \\ tags: , , , , ,

Dec 16

As a solid control and mud recycling system manufacturer, GN’s  product line is recognized and accepted by more and more customers all around the world. Its most advanced mud recycling systems could be used in a series of applications, such as oil and gas drilling, tunnel boring, diamond mining drilling, HDD, and so on. GN is always striving to improving its technology and reliability of Its product with most competitive price for the customers.

160427-uk-geo-mud-system
Just several months ago, GN Solids Control sold one set of mud recycling system to a UK customer for civil works. This system consists of a double deck shale shaker and a decanter centrifuge. The shale shaker is used for coarse separation to eliminate the large size solids. The screens on the upper deck will have smaller API number than the lower deck, which means the lower deck screen could separate finer solids than the upper deck screen. Then the processed fluids will drop to the tank and then pumped by a screw pump to the decanter centrifuge for further separation. The decanter centrifuge can separate the solid size up to 20 microns. The centrifuge is built tough and need less maintenance during normal operation. The bowl is made of duplex casting 2205 stainless steel, the bearing is made by world famous SKF, the screw conveyor and discharge port are protected by tungsten carbide tiles. There is also tough cover the spring to protect the decanter centrifuge during transportation. And after this separation, the mud could go back to the system to be reused again. This will be very environmental and cost effective. GN can customize the mud recycling system according  to customer’s different requirement and give customer the best solution.

160427-uk-geothermal-well-drilling
That is the basic introduction about the mud recycling system, If you have some further interest, welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected] .

written by GN Desander Desilter \\ tags: , , , ,

Nov 23
Today we will introduce one of GN’s solid control system which is Solids Removal Unit for diamond industry. The Solids Removal Unit (SRU) is mainly used in the drilling fluids and solids control for the small size mining rigs for the diamond drilling. Th2016-09-14-gn-solids-removel-unit-for-international-customer-2e solids removal units can provide the cost effective solution for the solids removal, reduced the environmental impact to the minimum level and greatly improved the efficiency for the diamond drilling.
The Solids removal unit is a closed loop for drilling fluid and solid process system. It contains mini shale shaker, mini decanter centrifuge (This is GN’s 223 centrifuge which is the world’s smallest.), pumps, mixing tanks and generators(optional). The working theory is simple, the drilling fluid will be circulated from the wellbore and went onto the shale shaker for coarse screening, the fluids will flow down to the tank and be pumped up by another feeding pump into the decanter centrifuge for finer screening. And the cleaner fluid will be recirculated into the well for drilling. There are also mixing hopper, chamber and pumps making the adding of chemical easy.
solids-removal-unit
The core product in the system is GN’s 223 decanter centrifuge which is specially designed for diamond drilling industry.  There are many highlights about the equipment: the bowl material is made from duplex stainless steel SS304 which is made by centrifugal casting. The discharge port is protected by special ceramic inserts which is made by world famous manufacturer with longer and more endurable life. The adjustable effluent port makes the pond depth adjustment easier and more convenient and fast. The pneumatic controlled spring will make the opening of the cover more easily and safely. During the transportation, the bowl lifting bracket can perform as the protection for the bearings. The bearings are made by the world famous NSK/FAG. The conveyor surface is made from Tungsten carbide tiles which is more endurable and easy for maintenance. The electric components are from SIEMENS or SCHNEIDER. The shale shaker will be used for drilling the surface hole, but later when the drilling reached the diamond layer, the solids will be finer and it’s not necessary to run the shaker for the coarse screening.
That’s the brief introduction about GN’s solid removal system for diamond drilling. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to [email protected]

written by GN Desander Desilter \\ tags: , , , ,

займ на карту срочно без отказа онлайн займ на карту без отказа