GN Desander Desilter

GN solids control can supply not only solids control equipment, but also oil & gas drilling ralated equipments, such as mud gas separator,flare ignition device, etc.

vacuum degasser & poor boy degasser

Mud gas separator also called poor boy degasser, it is a kind of well-control equipments.  When harmful combustible gas is too much to result in kick even Blowout accident occcurred, mud gas separator must be applied together with electric flare ignition device.

GN ZCQ series mud gas separator have two types, one is manual-control, the other one is auto-control, the  pedestal can be made into fixed type or elevating type according to customer’s requirement.

Vacuum degasser is also called mud gas separator, but they are different equipments. When there is only a little gas invade drilling mud and the gas is not harmful combustible gas, vacuum degasser can be applied in such situation. At the same time, vacuuum degasser can be used as agitator with large power, suitable for variable kinds of drilling fluids circulation system.

Vacuum type degasser is the most common type, there is a new centrifugal  degasser applied.

Contact GN solids control for more information about vacuum degasser and mud gas separator.

written by GN Desander Desilter \\ tags: flare ignition device, mud gas separator, poor boy degasser, vacuum degasser

Well control operations are instructions on blowout-prevention equipment, warning signs of kicks.  

Blowout is the uncontrolled release of crude oil and/or natural gas from drilling well after pressure control systems failed. Since it is a horrible accident, we need to less and prevent its happening by careful operation and proper well-control equipments.

vacuum degasser

Well control equipments including: 

BOP( Blow-out preventer):

Blowout preventer is a large, specialized valve used to seal, control and monitor oil and gas wells. Kicks can lead to a potentially catastrophic event known as a blowout. Blowout preventers are also intended to prevent tubing, tools and drilling mud from being blown out of the wellbore when a blowout threatens. Blowout preventers are critical to the safety of crew, rig and environment, and to the monitoring and maintenance of well integrity; thus blowout preventers are intended to be fail-safe devices.

 Vacuum degasser:

Vacuum degasser in oilfield drilling fluids gas separating also called Gas Buster. Vacuum Degasser is a special-purpose device for the treatment of gas in the drilling fluids. It can get rid of various gas of invasive drilling quickly. Vacuum degasser is very important for returning mud gravity, stabilizing mud viscosity and reducing drilling cost. 

Vacuum Degasser( degasser) is the first units of solids control equipment arranged to treat drilling mud. As such, they process all of the drilling mud from the flow line before the mud reaches the primary shale shakers. The units have no moving parts and rely on the density difference between the gas and the mud for removal. The process is simple, yet very effective for well drilling fluids processing system.

Continue reading »

written by GN Desander Desilter \\ tags: BOP, flare ignition device, mud gas separator, poor boy degasser, vacuum degasser, well-control equipments

Mud gas separator( also called poor boy degasser) removes air or gases (methane, H2S, CO2 and others) from drilling liquids. If the gas content in the mud is high, a mud gas separator or “poor boy degasser” is used, because it has a higher capacity than standard degassers and routes the evolved gases away from the rig to a flaring area complete with an ignition source.

GN mud gas separator

 What is the features of GN mud gas separator? 1 Matched flare Ignition device available, to provide complete solution for you.

 GN Flare Ignition Device of blown down fuel gas is a kind of handling arrangement used in blown down natural gas, the tail gas from collecting and distributing station of natural gas and from refinery. And being a kind of security and environmental protection equipment, the flare ignition device can be used to have the blown down harmful gas ignited and burned to prevent the environment and security from being endangered. The flare ignition device, apart from being used in the refinery and gas distribution station, may be matched with Mud Gas Separator. And now, as a matured product it has been extensively used in petroleum drilling engineering.

 2 Coating and Painting:

 External coating 3 layers, Internal coating 2 layers.

 External coating:

Surface preparation: Commercial blast SA2, SSPC-SP6

Primer coat: (Kansai & Cosco)Japan Brand epoxy zinc-rich anticorrosive paint

Intermediate coat: micaceous iron oxide anchor coat

Top coat : aliphatic polyurethane top coat

The External coating system is composed of zinc-rich epoxy primer, micaceous iron oxide anchor coat and aliphatic polyurethane top coat, which is with advantages of good antiseptic effect and Durability.

Continue reading »

written by GN Desander Desilter \\ tags: Commercial blast, flare ignition device, Hazardous Gas, mud gas separator, poor boy degasser, Skid-Mounted, solids control equipment, Trailer Transportable

Recently wellsite disasters have led to an increased emphasis on properly sized mud/gas separators. Mud gas separator is a device that removes gas from the mud coming out of a well when a kick is being circulated out.

 GN Mud gas separator has been designed to capture and separate large volume of free gases within the drilling fluid. Designed for high pressure wells, this unit controls the circulated gas to the surface separating the gas from the mud and vent it.

mud gas separator

 Simplicity is the essence of GN design for mud gas separator. It can be knocked down for easy transport.

 Example1

31.5” Mud Gas Separator(ZYQ800) is a self contained unit that allows for easy mobilization. It is ideal for use where drilling is likely to encounter large volumes of gas, sour gas or when an operator is drilling with an under-balanced mud column.

 The Mud Gas Separator is primarily used to separate and safely vent from the active mud system large pockets of free gas that may include toxic gases such as hydrogen sulphide

 31.5″(800Mmm) diameter by 108″ seam to seam vessel equipped with internal baffles, 5″ mud inlet, 6″ mud outlet with “J” tube design_Manages approximately 1056 GPM, and 36000 BBL/Day. Unit is designed to mount on top of the tank and secured into position. This allows the unit to be lowered to the bottom of the mud tank for transportation.

  Continue reading »

written by GN Desander Desilter \\ tags: mud gas separator, poor boy degasser, vacuum degasser

Oilfield drilling Poor Boy degasser (mud gas separator) is professional equipment to treat the gas invade mud. When the drilling mud result gas invade, the proportion of its weight and viscosity have a greater deviation not to meet the requirements of drilling. The serious situation is that would cause Chung well, and even blowout accident occurred, if not to treat it timely. ZYQ series Gas-liquid Separator combined with the (Company site: Solids Control System

Oilfield drilling Poor boy degasser that removes air or gases (methane, H2S, CO2 and others) from drilling liquids. There are two generic types that work by both expanding the size of the gas bubbles entrained in the mud (by pulling a vacuum on the mud) and by increasing the surface area available to the mud so that bubbles escape (through the use of various cascading baffle plates). If the gas content in the mud is high, a mud gas separator or “poor boy degasser” is used, because it has a higher capacity than standard degassers and routes the evolved gases away from the rig to a flaring area complete with an ignition source.

mud gas separator

Continue reading »

written by GN Desander Desilter \\ tags: flare ignitor, mud gas separator, poor boy degasser, solids control system