GN Desander Desilter

Summery of GN sand pump

GN sand  pump designed for pumping drilling fluid or industrial suspension (slurry), the use of advanced design theory can be pumping abrasive, liquid viscosity (resistance) and corrosion. Compared with an ordinary pump, excellent flow, high temperature, long life, easy maintenance, high reliability, significant energy saving effect and so on, now widely used around the world on land and offshore drilling.

Sand pump connections

Application of Mission sand pump

1Drilling applications:

Mud mixing and shearing operations, demanding and delisting, degassing, supercharging, centrifugal feed, mud cooling towers, and wash down.

2Others

Chemical, petroleum (refining), industrial, construction and agricultural applications.

Mission sand pump replacement

 Installation instruction

1 Best installed near the pumps and pumping source, and to shorten the length of the inhalation segment, reducing the loss of the pump self-priming pump must be installed below the level of the pumping source.

2 Firstly pour the concrete foundation, place″T″type channel iron when pouring, and install skid base after the concrete freezing. All the bases are required to be level in order to avoid the machine shaking.

GN SAND PUMP HEAD

3 Coupling installation

3.1 Coupling must be concentric with Shaft, the two axes must be aligned and its error limits: The value of parallel deviation cannot be over 0.25; the value of intersection angle error of the two axes cannot be over 0.12.

3.2 Check: Checking the two errors by percentage meter with pedestal (As fig. shown). Its two touches must keep close to the outside circle surface or face of the coupling and rotate slowly when checking. Take the max reading shown on the meter as error value.

written by GN Desander Desilter \\ tags: Mission pump replacement, Mission sand pump, Solids control sand pump