займ на карту срочно без отказа займ онлайн
Jan 27

In this article, we mainly introduce the different types of centrifuge that manufactured by GN Solids Control. Now we will classify the decanters based on different features.

 1. Treatment Capacity

Based on the treatment capacities, GN could manufacture 5 different decanters. The capacity is from minimum 40GPM to maximum 484GPM, which could meet the requirements from customers in different industries. The details are as below,

GN Centrifuge

GN Centrifuge




2. Centrifuge Speed

Based on the centrifuge speed, GN has 2 different choices for customer option with each type of centrifuge.

l  Fixed Speed: the speeds of drum and helical pusher are fixed and could not be changed by customer;

l  Variable Speed: the speeds of drum and helical pusher are variable and customer could chose and set the speed according to requirement. It will be very convenient for the customer and also helpful for improving the work efficiency.

Like the Model GNLW223 centrifuge, the speed could be 3800RPM or 0~3800RPM.




3. Configuration

With each type of centrifuge, GN also has the standard configurationand high configuration for customer option. Actually both of the 2 configuration’s centrifuge, Here GN are committed to good quality and perfect performance.

Compared with the centrifuge with standard configuration, the centrifuge with high configuration will be much better on some aspects, such as,

  • Raw Material

The former drum is made from S304 stainless steel by centrifugal casting;

The latter drum is made from Duplex 2205 stainless steel by centrifugal casting, the ram material is better; Continue reading »

written by GN Desander Desilter \\ tags: , , ,

Dec 04

GN produce middle spe

drilling fluids decanting centrifuge

drilling fluids decanting centrifuge

ed & high speed drilling fluids decanting centrifuge, the models available LWF450x842N, LWF450x1000N, GLW355X1250N, GLW-V-355X1250N.

GN decantging centrifuge is mainly for oilfiled/gas drilling fluids and HDD drilling fulids, can not be used to process waste water, organic polymer, chemicals, food industry, etc. Its main function is recycling barite and separate fine particles to keep the density/weight of the drilling fluids.
If you are in need of drilling mud decanting centguge, pls contact GN for more information.

written by GN Desander Desilter \\ tags: , ,

Apr 17

GN solids control can manufacture middle speed, High Speed & Variable Speed decanter Centrifuge according to the customer’s requirements.

With the improvement of petroleum drilling technology and environmental protection awareness, higher requirements are put forward to the petroleum drilling solid-control system, mainly embodies in the following three aspects:

high speed Decanter centrifuge

high speed Decanter centrifuge

a)   Oil gas exploration developer wish to use more clean mud drilling to protect the oil gas layer so as to achieve higher oil gas production.

b)   The using of turbo screw drilling technology put forward higher requirements on the mud cleanness.

c)    More attention will be paid to the disused mud treatment, while treat the disused mud is mainly to separate solid phase from liquid phase as much as possible.

Continue reading »

written by GN Desander Desilter \\ tags: , ,

займ на карту срочно без отказа онлайн займ на карту без отказа