займ на карту срочно без отказа займ онлайн
May 20

Onshore and offshore/jack up oil well drilling both request drilling mud equipments for better mud property and performance. The important thing is the explostion proof motor and other parts should be marine usage. Kindly find following detail.

Jack up rig information

A jack-up rig is a type of mobile platform that is able to stand still on the sea floor, resting on a number of supporting legs. The most popular designs use 3 independent legs, although some jackups have 4 legs or more. On “mat-type” jackups the legs are connected to a submerged hull.

Contents: 1. Operation

2. Types. 2.1 Drilling platforms, 2.2 Barges

3. Jackup rig mud equipments

4. Other introduction on jackup rig

A jackup is a floating barge fitted with long support legs that can be raised or lowered.  The jackup is maneuvered (self-propelled or by towing) into location with its legs up and the hull floating on the water. Upon arrival at the work location, the legs are jacked down onto the seafloor.

Drilling Fluid System similar as Jackup rig mud unit

Drilling Fluid System similar as Jackup rig mud unit

 

A Jackup rig mud equipments construction

This mud process unit including shale shaker, desander desilter hydrocyclone, drilling fluid centrifuge, screw conveyor, vacuum degasser, also gumbo conveyor

Actually, the on shore well drilling usually don’t need the screw conveyor neither gumbo conveyor. This jack up rig mud process unit is a large one. The unit holding capacity upto 1500GPM.

There are totally 3 sets of linear motion shaker. The vacuum degasser provide 1100GPM capacity, then three 10″ desander cones, twenty-four 4″ desilter cones and bottom shaker GNZS703. We set 2 decanter centrifuge  over there. The total treating capacity is 430GPM. One is middle speed the other is high speed

For two conveyors, the main function is to transfer drilling mud also the material for complete well drilling. This provide more fresh drilling luid as well as filteration or separation on drilling mud. This will benefit jackup well drilling over sea

 

Other comments on jackup rig

The jacking system is used to raise the entire barge above the water to a predetermined height or “air gap”, so that wave, tidal and current loading acts only on the relatively slender legs and not on the barge hull. Modern jacking systems use a rack and pinion gear arrangement where the pinion gears are driven by hydraulic or electric motors and the rack is affixed to the legs.

If you are interested on more detail please feel free to contact GN. We can communicate with each other and get more improvement also acknowledgement on jackup rig drilling fluid process equipments and units.

written by GN Desander Desilter \\ tags: , , , , , , , ,

One Ping to “Sale-Jackup rig mud equipments”

  1. Desander,Desilter & Mud Cleaner Says:

    […] Sale-Jackup rig mud equipments […]


One Response to “Sale-Jackup rig mud equipments”

  1. 1. Everette Engert Says:

    I can’t believe I’m just now reading this. I should keep up with what’s going on better.

Leave a Reply

займ на карту срочно без отказа онлайн займ на карту без отказа