займ на карту срочно без отказа займ онлайн
Jul 26

The drilling waste gennerated by drilling operations ,if not treated properly ,it will do harm to the enviorment ,that is why more and more countries begin to set up regulations to minimise the oil on cuttings ,so that the drill cutting can be reused or discharged .

There are two types of drilling mud ,one is oil based mud ,the other is water based mud .

There are 2 main equipments respectively used for water based mud and oil based mud. GN Hi G Cutting Dryer Shaker used for waters based mud and GN Vertical Cuttings Dryer is used for Oil based mud.

The GN Hi-G Dryer Shaker is with long shaker deck big capacity which is used for waste management to treat the drilling cuttings from the primary solids control equipments, like shale shaker, desander desilter to dry the solids for transportation, and make the fluids easier for further treatment.

Hi-G dryer shaker

Hi-G dryer shaker

To be brief,solids control equipment can help circulate the drilling mud and reuse of the precious drilling fluids .While waste management is to separate the oil on cuttings from the drilling mud to achive dryer mud ,then discharge to land filed or road construction without pollute the air water and enviroment.

GN Solids Control hasDecanter centrifuge to polish the Dryer and Hi G Shaker effluent.  The Cuttings Dryer and Hi G shaker effluent is typically collected and pumped to a highvolume decanting centrifuge for further cleaning. The decanting centrifuge separates the slurry into fine solids and “cleaned” fluid, which is often sent back to the active drilling fluid system. A portion may be used as dilution for the  Dryer and Hi G shaker. The solids from the centrifuge can be collected in the same vessel or conveyor as solids from the Dryer or Hi G shaker.

Decanter Centrifuge

Decanter Centrifuge

GN solids control is the only API&ISO certified solids control and waste management system manufactrue in China till now.Our products have been exported to more than 60 countries around the world and serve for many NOC oilfiled projects.Our 14 centrifuge is the best alternative for Derrick DE1000 and Mi-swaco 518 ,due to its better price and reliable performance.

written by GN Desander Desilter \\ tags: , ,

Leave a Reply

займ на карту срочно без отказа онлайн займ на карту без отказа