займ на карту срочно без отказа займ онлайн
Jul 01
For quite a while after we developed the vacuum pump, both some client and oureselves have some concern on the high viscosity sludge. So we also reach different client for test, have done some temporary test on one site, but it is too short to judge that this is good enough. Then in the other days, we got some good news from another site, it is well working.
Well so we add it into the vacuum pump video, as below.
Waste vacuum pump, also named as solids transfer pump. It is a pneumatic slurry transfer vacuum pump for liquid, slurry, and solids transfer. With special structure design, it can be used at tough environmental for solids transfer, high working performance and less maintenance. The pump can transfer material with high gravity and high density, solids content max. up to 80%.
So now we are sure that except the drill cuttings, water, it is handling the oil sludge. Any related inquiries, freely let us know.
Other applications
Waste mud and waste solids discharged from shale shaker, mud cleaner and centrifuge transfer
Drilling mud transfer
Waste pit cleaning
Hazardous waste recovery
Oil sludge, tank bottoms residual removal and transfer
Barge holdings and vessel bottom clean out
Bulk tank and silo transfer of material
Sand; Course, fine, conventional and frac sand
Diatomaceous earth

written by desander desilter

Leave a Reply

займ на карту срочно без отказа онлайн займ на карту без отказа