займ на карту срочно без отказа займ онлайн
Nov 30

Mud transfering centrifugal pump in GN’s product line range from 20~320m3 by flow. This centrifugal pump is designed to handle abrasive, viscous and corrosive fluids in drilling or industrial slurry applications. Comparing with conventional pumps, GN’s centrifugal pump has an exceptional performance by large volume, high temperature capabilities and easer to maintenance.

GN Mud Transfering Centrifugal Pump

Centrifugal Pump Structure and Parameters

With outlet 2″-6″, GN’s centrifugal pump has a head capacity range from 12m to 62m. It could be working well in the tempreture span of 100℃(-40℃~60℃).
Strong and thick pump housing design of ring runner shape to eliminate the turbulence and cavitation within the pump housing. The small distance between the impeller and the housing to be the same at all points as the centrifugal design.
In order to reduce the turbulence, lower radial and thrust loads, and provides a smooth flow of fluid through the pump, the impeller is designed for open-vane. Aslo thie design allow fluid leaving the impeller to blend with recirculating fluid to reduce abrasive wear of the casing. By using O-type oil seal to protect the no exposed shaft threads, the lifetime of the pump largely extended.
Worth to mention is that all GN centrifugal pump is using mechnical seal. All metal parts are made of 316 stainless steel. Elastic part are manufactured from viton. Both rotating and stationary seal faces are tungsten carbide.

Centrifugal Pump Functions

For drilling application, GN centrifugal pump could be used for mud transfering, mud mixing and shearing operations, desanding and deislting, degassing, supercharging, centrifugal feed, mud cooling tower and wash down.

In solids control system, GN’s centrifugal pump has below applications:

  • Mud transfering  By locating the centrifugal pump on the mud tank skid, the drilling mud could be transferred from tank shaker compartment to the Mud Cleaner for treatment by hydrocyclone.
  • Mud Mixing   Combined with a venturi type hopper,  the centrifugal pump could be used to shear the bentonite powders and mix the new clean drilling mud.
  • Charging pump   Connected with the mud pump unit, centrifugal pump could transfer the clean mud to mud pump, then from mud pump back to the drill rig.

Besides the mud transfering pump, GN could also offer slurry pump, mono pump for Decanter Centrifuge, and shearing pump for shearing large drilling fluids chemical particles. For more information about GN mud transfering centrifugal pump, please leave a message or contact with us.

written by GN Desander Desilter \\ tags: , , , , , , , , , ,


Leave a Reply

займ на карту срочно без отказа онлайн займ на карту без отказа