займ на карту срочно без отказа online installment loans займ онлайн
Dec 25

GN solids control produce linear motion mud cleaner and balanced elliptical motion( BEM) mud cleaner.

A mud cleaner is consist of de-sander, de-silter and shale shaker, GN also produce linear motion shale shaker and BEM shale shaker with 3 panels or 4 panels. The larger screening area it has, the better treating effect can get. So clients prefer 4 panels shakers rather than 3 panels shaker, but it depends on the treating capacity and your mud tank dimension, 4 panels shakers are not always better.

linear motion Mud cleaner

linear motion Mud cleaner

GN linear motion mud cleaner

1 Linear Motion shale shaker

We have 4 models linear motion shakers GNZS83-3, GNZS63-3, GNZS83-2, GNTJ60. GNZS83-2 shaker and GNZS83-3 shaker adopts same dimension shaker screen, pyramid screen or soft strip screen, just when clients need smaller treating capacity such as 60m3/h, we will recommend 2 panel shale shaker GNZS83-2, when they need large treating capacity such as 200m3/h, we will recommend 3 panel shale shaker. GNZS63-3 adopts Brandt Cobra shaker screen with wedging technology, when clients need a treating capacity120m3/h.

G force is an important parameter for shale shaker. We use Italy Oli vibrating motor, so the max G force can reach 7.0 G, and it is adjustable.

Deck adjustable angle is also paid more attention to make a decision, GNZS83-3 shaker can be adjustable -1°~5°

2 De-sander

 The flow rate of 10” hydrocyclone at 75’ head is about 400gpm, the hydrocyclone number is depends on the total flow rate you required, for example, if you need 1000gpm capacity, you need 3 No.s, if you need 800gpm, 2ea is enough.

3 De-silter

The flow rate of each 4” cone at 75’ head is about 75gpm, if 1000gpm, you need 16pcs 4” cones.

4 Inlet & outlet discharge headers pipe connection

 Usually it is 6” inlet and 8” outlet. We provide 2 methods of connection, one is flange connection, the other one is flexible hose connection, you can disassembly the hydrocyclone part during transportation if it exceeds the transportation limit. When you arrive at drilling site, installation is convenient as well, it does not take a lot of time. Also you can connect any hose with the flexible hose very fast.

5 Others

Optional pressure gauge: we have 2 kinds of pressure gauge, one is with Mpa, other one is PSI, you can choose it according to your convention.

Skid design: oil field used design, our solids control equipments are mainly used for oil/gas drilling, so all of them are designed for oil field, just like our mud tank is oilfield 3-runner design.

GNZJ83-3 mud cleaner is best sold model of GN equipments, it is capable for large treating capacity situation and fine particle separation, we provide screens with mesh size from 150~250 for the underflow shaker . To know more information about GN linear motion mud cleaner, pls contact GN.

written by GN Desander Desilter \\ tags: , , , , ,

2 Pings to “Linear motion mud cleaner”

  1. 500GPM Drilling mud circulation unit Says:

    […] When we transfer whole sytem we only need to uninstall the cones part over bottom shaker of mud cleaner. […]

  2. Oilfield mud centrifuge used in UAE Says:

    […] shaker, NOV Brandt shaker, Kem-Tron centrifuge, NOV Brandt centrifuge, Derrick VFD centrifuge, GNZJ mud cleaner, […]


2 Responses to “Linear motion mud cleaner”

  1. 1. イーモバイル Says:

    I am a student willig to become a math teacher. You made lots of good points. Keep up the great work. Thank you very much.

  2. 2. Colton Mittelsteadt Says:

    It’s hard to seek out knowledgeable folks on this subject, however you sound like you realize what you’re talking about! Thanks

Leave a Reply

займ на карту срочно без отказа онлайн займ на карту без отказа