займ на карту срочно без отказа займ онлайн
Sep 18

Drilling mud circulation during zero-discharge system is an endless cycle. However, while the drilling fluid filtering through the start from shale shaker to the end of decanter centrifuge,
The density of the mud changes during filtrations. The total amount of the drilling fluid will lose by continuing fluid filtering as well. Jet mud mixer use to make up the lst of the drilling mud by adding new fluid into existing fluid and mix them well. It is also mixes other additive into the drilling mud such as betonies and barite. A Chemical additive such as polymer are used to change drilling fluid density, viscosity and hydration. The additive is entered by jet mud mixer into the mud storage tank.
The mud mixing hopper is part of the jet mud mixer that powered by centrifugal pump that allow the drilling mud move at high velocity to funnel shaped hopper. Additive materials are added through the hopper to provide uniform mixing. Liquid base additive also added through a hopper to provide uniform mixing.

GN Jet mud mixer

GN Jet mud mixer


The capacity of the jet mud mixer, various mud tanks sizes and correspond shear pump is providing it as well to ensure pressure.
Mud mixer widely used in HDD (horizontal directional drilling) and oil gas drilling. Jet mud mixer device generally consists of a sand pump and a jet flow mixed hopper with manifold valve connection and are installed on a pedestal called the single jet mud mixer device, or by two pumps and two mix slurry hoppers called double jet mud mixer device.
The jet mud mixer paired up by shear pump various input rates and mud tank size, it makes mud contain rheological properties and decrease cost of the drilling mud as possible. GN Solids Control’s jet mud mixer treating capacity from 200 GPM to 1408 GPM.

written by GN Desander Desilter \\ tags: , , ,


Leave a Reply

займ на карту срочно без отказа онлайн займ на карту без отказа