займ на карту срочно без отказа займ онлайн
Apr 28

To know how does mud agitator work during drilling fluid process we need to understand the basic information on its principle and main functions, etc.

 

Mud agitator types

In oil well drilling mud solids control system, presently we use mechanical agitators, but majority will use hydraulic agitators also. The mechanical agitator is combined with transfer device, shaft and impeller.

Different type mud agitators will have different function, such as moving agitators, tube type agitators, swing agitator. Moving agitator contains two rotation type. Including self-rote according to itself bearing center, and the revolution subject to tank center. Both rotation including vertical type and horizontal type. This results strong convection will keep solid not deposite

Mud agitator for sale

Mud agitator for sale

 

Agitator function in drilling mud process

In order to keep the drilling fluids even and make particles suspending, we need to fix the agitators on recycling tank. Agitating will promote the coordination of drilling mud material, such as bentonite and barite. The agitation is very important to dissolve the bentonite, it increases the area between each part and increase the speed of reaction.

 

What will keep drilling mud density and other features steady? We should keep agitator working continuously to avoid solid precipitating and keep solid suspending is helpful to separate them by Desander, Desilter, and dcanter centrifuge, etc. But the useful solid such as weighting materials including red iron, barite powder and some bentonite need even suspension.

Other issues on drilling mud agitators

The agitator can be designed as elevating shaft. The seal on reduction box bearing is rather important. Including self –sealing, filling seal, etc. Then the rotary speed, horse power, impeller, etc.

 

Agitator impeller selection

There are many type impeller in chemical and food industry. The impeller have wide use range so in oil field solids control there are mainly 3-4 types. Including oar type, opening turbo, round turbo, and push type

Equally the working condition and object viscosity and flow situation also have certain appropriate range. During long time experience and research, all types impeller and dimensions have an approximate range if we design impellers not included in these types they will not be ideal neither on outlook nor performance.

After getting above information we also need to know the recycling rate calculation of impeller and the size and layer as well as the agitator power or gear box selection. We ever talked something on these matter in former articles. If you have any other questions please feel free to contact GN

written by GN Desander Desilter \\ tags: , , , , ,


Leave a Reply

займ на карту срочно без отказа онлайн займ на карту без отказа