займ на карту срочно без отказа online installment loans займ онлайн
May 05

System general information

This solids control system including one tank mounted with 1) Shale shaker, 2) Mud cleaner, 3) Mud agitator, 4) Centrifugal pump, 5) Mud mixing pumpetc. Combined drilling mud recycling, mixing and storage as complete solids control system for small well drilling rig

GN500GPM Mud sytem detailed information

1)Handing Capacity: Up to 550 Usgpm (2080 litres/min) for total system

2)3 Phase Cleaning: With 2.6㎡ first phase shaker, and 2×8″ Desander cone, 8x4inch Desilter cone. With 2.6㎡ drying screen for mud cleaner. Specifically for high solids content and fine solids.

3)Cut Point: Designed to achieve a cut point of 16 microns

4)Transport Dimensions:  Mud Tank With Attachment: 9000L x 2400W x 4300H (Tank folded for transport,walks ,hand rail holded on tank)  Shaker dimention: 2.45m X 2m X 1.7m  Mud Cleaner Dimention: 2.45m X 2m X 2.5m  This design and dimension provide more convenience for transportation and handling

5)Capacity: Total storage capacity 4500Gallons,Dirty mud:1700Gallons,Clean mud:2800Gallons.

6)Power: Explosion proof for all the motors and control panel.Integral control panel for all electrical functions.   Total power for all equipments:188kva,genertor Recommended:≥210kva

7)Sea Transport: Two 40feet Container for all items and remaining space for spare parts.

8)Mixing Function: High speed continuous mixing facility incorporated.

9)Integral charge pump to supply clean mud back to the drilling rig.

10)Mud mixing in cleaning mud compartment(Mixing Compartment) with 7.5kw mud agitator.

GN500GPM rig solids control system for sale

GN500GPM rig solids control system for sale

GN500 GPM mud system sales point

Cleaning Tank is divided into 3 compartment,1# Shaker compartment,2# De-sander compartment,3# Mixing compartment.

1)Continues feeding of dirty slurry from mud pit to Shale Shaker. The 100YZ100-30 Submersible slurry pump feed slurry from mud pit to GNZS70-3 Shale Shaker at capacity of 615 GPM .Slurry pump is made from Cr26 Abrasion resistant
Alloy which allow users to pump high solids content fluids.

2)Pre-screening of the returned mud using GNZS70-3 Shale Shaker.This shaker can handle a throughput of more then 615 USgpm and is designed to remove particles down to 250 microns(60mesh), 7G force linear motion GNZS70-3 Shale Shaker with big screen area(2.6㎡) especially using frame pyramid screen treating capacity increased which allows user to use big mesh size for fine solids, and decrease the solids content and reduce solids load for Mud cleaner.

3)Secondary and third cleaning of the returned mud using a GNZJ70-3 (8″x2 + 4″ x8) Mud Cleaner.1# SB5×4-14 Centrifugal pump feed mud from 1# Shaker compartment to feed 8″x2 de-sander cones, where the particles larger than 50 microns are separated out by centrifugal force from desander cone nipple, and get down to GNZJ70-3 mud cleaner bottom shaker with a finer screen(150/200mesh) which again produces a virtually dry product. Major fluids with particle size less than 50microns goes to 2# De-sander compartment. This is the 2nd phase solids control.

2# SB5x4-14 Centrifugal pump suck mud from 2# desander compartment and feed to 4″x8 desilter cones. where the particles larger then 16 microns are separated out by centrifugal force from desilter cone nipple,and get down to GNZJ70-3 mud cleaner bottom shaker with a finer screen, which again produces a virtually dry product. Major fluids with particle size less then 16 microns goes to

3# Mixing compartment. This is the 3rd phase solids control.

4)Integral mixing system using SLH150-35 Jet Mud mixer.This system allows fresh mud to be prepared very rapidly from bentonite powder. One of the 2 pumps on tank end is dedicated to this function allowing continuous mixing or recirculation as required.

5)Integral charge pump to supply clean mud back to the drilling rig.The mixing pump above is a dual function pump, on mixing pump outlet with a T pipe can be controlled by a valve to provide a continuous supply of clean mud from 3# mixing compartment under pressure to the high pressure mud pump, avoiding problems of starvation and cavitations which can rapidly cause damage.

Rig mud system price for sale

Drilling rig is used in various of well drilling. The drilling mud solids control system should be suitable for certain rig. The price for solids control system should be decided by system main configuration, performance and structure

This system for sale is an optimal one with economical price for user. No matter you are oil and gas well drilling contractor, HDD project, CSM exploration, if you are interested in this system or need more information please contact GN freely. Rigth now.

written by desander desilter \\ tags: , , , , , , ,


2 Responses to “GN500GPM rig solids control system for sale”

  1. 1. jerry Says:

    can you provide the price for this system please.

  2. 2. intrinsically safe mobile phone Says:

    Hi there, You have done an excellent job. I will certainly digg it and in my opinion suggest to my friends. I am sure they will be benefited from this web site.

Leave a Reply

займ на карту срочно без отказа онлайн займ на карту без отказа