займ на карту срочно без отказа займ онлайн
Feb 17

In drilling waste management,the decanter centrifuge usually sit on a very high decanting centrifuge skid,for solids control,the decanting centrifuge sits on the Mud Tank after the desilter.

With the High Skid for the decanting centrifuge,this will help for discharge of the solids from the centrifuge to the sludge tank.

Decanting Centrifuge Skid

Decanting Centrifuge Skid

Decanting centrifuges are mechanical devices used for the separation of solids from slurries in many industrial processes. In oilwell drilling,centrifuges are used to condition drilling fluids by dividing the fluid into
high-density and low-density streams, permitting one to be separated from the other. The division is achieved by accelerated sedimentation. As the drilling fluid is passed through a rapidly rotating bowl, centrifugal
force moves the heavier particles to the bowl wall, where they are scraped toward the underflow (heavy slurry) discharge ports by a concentric auger, also called a scroll or conveyor, which rotates at a slightly slower
rate than the bowl. The separation of the heavier particles divides the processed fluid into two streams: the heavy phase, also called the underflow or cake; and the lighter phase, which is called the overflow, light
slurry, effluent, or centrate.

You can buy either decanter centrifuge or completed with skid from GN Solids Control.

written by GN Desander Desilter

Leave a Reply

займ на карту срочно без отказа онлайн займ на карту без отказа