займ на карту срочно без отказа займ онлайн
Mar 22

Drill Waste Management system, more often referred as DWM, is a very important unit in drilling projects, it normally contains Vertical Cuttings Dryer or called Verti-G, and a decanter centrifuge, each equipment comes with a screw pump, the one for cuttings dryer is for flushing, the one for decanter centrifuge is feeding, then the screw conveyor, to feed the cuttings to vertical cuttings dryer. The systems or equipment to Russia is normally come with containers, and the main reason is weather proof, in the horrible weather place, you got some protection. It also bring some extra bonus, i.e. easier for transportation, it is a whole unit, so easier for on site installation, less rig up / rig down time. If you are worrying about the maintainces, then we did worry when we design it, except the overhaul time will be a bit complicate which you will need bring everything out of a container, and put it back; all the other maintaince is ok. So as soon as the equipment is robust, that is not a concern.

Containerized Drill Waste Management System


Features of GN Vertical Cuttings Dryer
1. Main rotating parts flights, rotor and screen frame balanced individually for easy replacement in future
2. Flights used are hard facing to HRC65 for longer working lifetime
3. High pressure air knife prevents screen from blocking when processing high viscosity material and circled flushing system to avoid liquid channel block.
4. Oil lubrication system for with alarm for pressure limitation.
5. Main motor and oil pump motor interlocked to ensure correct start up procedure for operator.
6. VFD control available to speed ranging 0~900RPM.

Features of GN Decanter Centrifuge
* High G Force up to max 3000. Big Volume Design.
* Bowl Material Duplex Stainless Steel 2205 made from centrifugal casting.
* Conveyor Wear Surface: Tungsten carbide tiles .The life is much longer than hard surface. And all tiles is interchangeable for easy maintenance.
* Preasurized Explosiong Proof with PLC and HMI control for automatical operation.
* All the bearings for the centrifuge are SKF brand premium bearings.


Now more and more clients from Russia is using GN equipment, so do other countries. GN is a manufacturer, but also a flexible manufacturer to produce some equipment ready for client to use, and easier to use. 

written by desander desilter


Leave a Reply

займ на карту срочно без отказа онлайн займ на карту без отказа