займ на карту срочно без отказа займ онлайн
Aug 07

As one sister company of GN Solids ControlGN Separation & Conveying mainly focuses on industrial solids and liquid separation and conveying. GN Separation & Conveying product line covers 2 phase decanter centrifuge, 3 phase decanter centrifuge, 3 phase disc-centrifuge, screw press, industrial pump. 
COVID-19 brought a great lose to the whole world, luckily to say that more and more countries have get it fully controlled, companies are resumed to work and people can enjoy life under proper protection. With all the great lead work by China government, now China is only have very few cases, we are proud to participate in the IE Expo 2020 in Shanghai. 

2020.08.05 Oil Sludge Treatment 2

IE Expo China 2020 is one of the leading environmental shows in Asia, it will be held from Aug.13-15th in Shanghai New International Expo Center. Last year, there were nearly 74,000 visitors from almost 60 countries came to this show. 
GN Separation will bring 1. Oil Sludge Treating System, 2. Waste Water Treating Centrifuge, 3. Sludge Vacuum Pump to IE Expo. 
GN booth no. is W1  (G69/F69), welcome to visit us if you have plan to come to this show. You may connect with [email protected] to make an appointment. 
1.Oil Sludge Treating System
GN made oil sludge treating system is especially designed to treat oil sludge from drilling rig sites, refinery plant and oil tank bottom. With more and more companies paying attention to environmental protection, GN oil sludge treating systems are getting popular. 
It mainly includes pre-treating tank, shaker treating unit, 2 phase centrifuge treating unit and 3 phase centrifuge treating unit. After treated by GN oil sludge treating system, customers can get clean water, clear oil and dry solids. 

2020.08.05 Waste Water Expo 2
2.Waste Water Treating Centrifuge
GN centrifuge is largely used in more than 60 countries. GN Separation manufactures 9 inch, 14 inch, 18 inch, 22 inch and 30 inch bowl decanter centrifuges. Based on the treating purpose (clarifying, dewatering, thickening etc), GN provides P type, Y type, C centrifuges with different cone angles and L/D rations. 

2020.08.05 Waste Water Expo
3.Sludge Vacuum Pump
GN sludge vacuum pump is one of the tough pumps that is able to transfer and move solids up to 80%. An air compressor must be equipped in order to provide the working pressure, GN has 10B, 20B and 40B vacuum pump classified by the feeding flow rate.

written by desander desilter

Aug 04

GN Solids Control is a leading drilling mud cleaning system manufacturer, with customers in over 70 countries and regions are using GN made solids control and waste management systems. Both onshore and offshore drilling rigs can use GN drilling mud cleaning systems 
Last week, GN Solids Control finished manufacturing of one set of drilling mud cleaning system for a offshore platform, it will help to treat those dirty mud come out of drilling rigs and provide clean mud to reuse. Here are the main components in this GN Drilling Mud Cleaning System.

2020.07.17 Offshore Mud System

1.GN Shale Shaker
GN Shale Shaker is effective coarse drill particles remove equipment. By using different API nos. Of shaker screens, GN Solids Control made shale shaker is able to eliminate most of those solids larger than 100 microns. 
Linear motion shaker is strong enough to provide enough vibration force and keep the drilling mud from fall into small pieces. GN Solids Control also provide dual motion shale shaker with ellipse running choice. 
2.GN Mud Cleaner
GN Mud Cleaner is a compact treating unit includes 10 inch cyclones, 4 inch cyclones and bottom shale shaker. As we all know, 10 inch cyclone is also called de-sander, which is usually used to eliminate solids larger than 55 microns, while 4 inch cyclone also called de-silter which are normally used to remove 25+ microns particles. 
GN shale shake and GN mud cleaner are fixed on the top of one mud tank, suitable to resist long time sea water rusty. 

2020.07.17 Offshore Solids Control System
3.GN Centrifugal Pump
Centrifugal pump is widely used as feeding pump in solids control and waste management area. GN designed offshore drilling mud treating system is easy to connect all pipes with fast connections in a short period. All centrifugal pumps are designed with a DNV lifting frame, which is certified with DNV lifting standard. 
4.GN Screw Conveyor
Drill cuttings discharged from Shale shaker and mud cleaner are collected and transferred by screw conveyor. GN Solids Control is able to customized built screw conveyors in different lengths with different materials.

written by desander desilter

Jul 27

To meet the sepecial ambient requirement, we have done a lot of modifications accordingly, after lots of drilling waste equipment sent to Russia, we recently delivered another set. A verticle cuttings dryer and a intermediat tank within a 20ft container.For easier operation, a lifting device is included. Also proper railings, steps etc equipped for site real operation.

GN Decorated Container

The container is not just the shipping conatiner, it is well decorated, lots of details engineered to keep the inside warm, to well support the equipment, and for easier mantaining of the equipment in future.

Also many details for interaction with the other equipment on site.

GN Cuttings Dryer

GN Cuttings Dryer is also called Vertical Cuttings Dryer as the separating flight and screw basket are built in the vertical direction. After treated by GN cuttings dryer, oil on the final cuttings is less than 5%.

The model GN Solids Control provide is GNCD930E, 930 means the screen basket size is 930 mm, and E is the update version that GN built. GN Solids Control has been keeping upgrading all solids control and waste management equipment based on the valuable feed backs collected from different work sites.

Treating capacity is around 30-50 t/h. GN Cuttings dryer has 3 different sizes of screen basket openings include 0.25, 0.35 and 0.5 mm. For convenient repair and maintenance, GN Solids Control also provides one lifting crane to lift the screen basket.

We are able to cutstomize any system for any tuff site environment. Feel free to contact us to let us know your specific requirement.

written by desander desilter

Jul 27

GN Solids Control is a leading solids control equipment manufacturer and turnkey drilling waste management system provider. Every year, GN Solids Control provides hundreds of large turnkey solutions to global customers. GN Solids Control product line covers shale shaker, de-sander, de-sitler, mud cleaner, cuttings dryer and decanter centrifuge as well as various of transfer equipment like centrifugal pump, vacuum pump, submersible pump and screw pump etc. 
When treat high density oil sludge and large viscosity drill cuttings, it’s very necessary to use chemical dosing system. Several weeks ago, GN Solids Control provides a Containerized Chemical Dosing System for Dewatering Centrifuge to Africa. As we all know, GN centrifuge is mainly used to eliminate solids larger than 2-5 microns. In order to remove those finer particles, chemical dosing unit can help to unit all finer particles so centrifuge separate them out. 

2020.07.08 Polymer Dosing Unit

GN Solids Control builts different sizes or types of Chemical Dosing Systems. This system we provided to Africa is a containerized one.It mainly includes polymer dosing unit, PAC dosing unit, dosing tanks, air conditioner and decorated container. All components are designed in a compact structure, so it can move easily among different sites. 

1.Three Tank Automatic Powder Polymer Mixing System
Depend on the centrifuge flow rate, GN Solids Control can built different types of automatic powder polymer mixing system. 3 mixing agitator includes motors, gear boxes, shafts and impellers are using to mixing the powder thoroughly. Level meter is used to keep the liquid in a certain level. 2 sets dosing pumps are used to feed the flocculants into decanter centrifuge after maternity.   

2020.07.08 Chemical Dosing System

2.Coagulant Mixing Tank
Coagulant mixing tank is used to supply coagulant into decanter centrifuge which is also equipped with dosing pump. PH value can be adjusted in the coagulant mixing tank. 

2020.07.08 Dosing Tank

3.Container Attachments
Air container is provided to provide a proper working environment for operators. All the control panels and lights systems are also provided.

2020.07.08 PAC Dosing Unit
2020.07.08 Air Conditioner

written by desander desilter

Jul 10

GN design and manufacture waste management system for hydrovac slurry treatment and directional drill slurry. The solution is to use liquid and solids separation equipment to treat soil or soup or slurry generated from the hydrovac or HDD project and produce reusable material for construction and discharge clean water.

Normally, the slurry is contaminant-free comes from physical utility location in public right of ways, and directional drillingfor placement of underground pipes or utilities or other private property construction.

GN Hydrovac System Features

1) Complete Package design for Turnkey Solutions

2) Many years field proven experience

3) 4 Phase Separation System for better result

4) Modularized system for fast installation and flexible movement.

4 Phase Mechanical SeparationA standard hydrovac slurry separation system generally includes, scalping shaker, fine screening, desilter, then decanter centrifuge. If needed, desander cones can be added in between shaker and desilter, then it would be 5 phase.

Depends on site arrangements, what we have so far, is the vacuum truck dive backwards to a higher stand, dump thru a big hopper, which collectively leads everything to the scalping shaker, which separate most of the big solids out, the fluid then been transfered to a shale shaker which equipped finer shaker screens, to separate the finer particles out. Same as last step, the pump feed it to the desitler cyclones, thur the cylone fluids been pumped to the decanter centrifuge, the solids dewatered by the screens underneath.

The decanter centrifuge is final stage, considering the high solids content, this is actuall the most important step, normally also have some polymer ready for dosing the floating particles. After this, then all the solids stackable, water is reuseable.

written by desander desilter

Jul 10

GN Solids Control has been working on providing turnkey solutions in oil and gas industries for many years. GN made solids control equipment like shale shakerdecanter centrifuge, cuttings dryer, mud cleaner, desander, desilter and varieties of pumps are widely used in thousands of drilling rig sites. 

2020.06.19 Mud Cleaner for Offshore

As we all know, on shore and off shore drilling rigs both play a vital important role in explore and produce oil. Usually, off shore drilling rigs have higher technical demands on all used equipment includes the solids control equipment as they are working far away from land and should work properly with very small chance of down time. 
GN Solids Control has already provided both onshore and offshore solids control systems and drilling waste management systems to in the past years. With more and more GN equipment working on offshore drilling rig platforms with excellent working performance, GN Solids Control made equipment become the most cost effective solutions, especially when the oil price is fluctuate at a historical low level. 

2020.06.19 Offshore Mud Cleaner 1
GN Solids Control provided DNV lifting certificate decanter centrifuges and shale shakers to offshore drilling rig contractors before. DNV certificate is usually mandatory. This time that 2 sets GN mud cleaners are also with DNV lifting frames and pads to guarantee a safety working. 
GN mud cleaner we usually called ‘ 3 in 1’ as it’s composed with 10 inch cyclones, 4 inch cyclones and a bottom shale shaker. These 2 sets GN Solids Control provided are GNZJ594-3S16N. Polyurethane made cyclones are covered with metal to guarantee a long time usage without weariness. Shale shaker working angle is easily adjusted by a side lever from -1degree to +5 degree. Shaker screens are fixed with patented wedges for easy locking and unlocking. Whole shake deck is made of stainless steel to protect from rusty.  
GN Solids Control also has some sets shale shakers stocking in Houston, USA or Langfang, China. Please feel free to connect with us if you need any shale shakers or mud cleaners.

written by desander desilter

Jul 09

GN Solids Control built different types of transfer pumps such as centrifugal pump, submersible pump, screw pump, vacuum pump and cuttings transfer pump etc. Different pumps are designed to use in different working conditions and suitable for different materials. 
Today we would like to give GN customers a short introduction of GN Cuttings Transfer Pump. As we all know, GN Solids Control is specialized in solids and liquid separation, many materials like high density, large viscosity, big solids content drill cuttings are hard to move when use tradition transfer pump. GN made cuttings transfer pump is especially designed to move the drill cuttings effectively. 

2020.07.05 GN Cuttings Transfer Pump 1

It’s usually seen that screw conveyors working in drilling rig site to collect the drilling cuttings discharged from shale shaker, mud cleaner, decanter centrifuge and cuttings dryer etc collected by screw conveyors first, and move to oil sludge treating plant for further treating. While screw conveyor is not suitable to use when there is too much water inside, also every time to assemble and disassemble the screw conveyor cost a lot time, let alone must take the tile angle into consideration. 
GN Cuttings Transfer Pump is using a hydraulic cylinder and the most popular S type distribution valve. Drill cuttings are moved by back and forward movement of the hydraulic cylinder and S type valve distribution. It can move high solids content drilling cuttings by flexible hoses to targeted treating equipment. 

2020.07.05 GN Cuttings Transfer Pump 2
Horizontal moving distance is 100 m, and vertial distance is up to 40 m. Whole machine is designed compactly in one lifting frame to move easily and maintenance freely. When use on offshore drilling platform, GN Cuttings Transfer Pump can be also provided together with DNV 2.7-1 Lifting Certificate. Control box and motor are optional for IEC, ATEX and CNEX explosion-proof.
GN Solids Control now provides 3 models, GNYXB10-15, GNYXB15-22 and GNYXB20-30. Transfer flow rate from 20 t/hour to 40 t/hour.

written by desander desilter

Jun 27

We recently shipped another 5 sets of fix speeddecanter centrifuges to a Russian company. GN decanter centrifuges are largely used in Russia, every year hundreds of decanter centrifuges are delivered to Russia.

These 5 sets decanter centrifuges are GN 14 inch bowl centrifuges, which will be sent to 2-3 drilling rigs sites.

As a famous solids control and waste management equipment supplier, we have epxorted to more than 70 countires, and now a good circle have been built, more people use it, more people spread, more orders.

GN decanter centrifuges are using the SS2205 or SS2304 made rotating bowl, built by centrifugal casting. Screw propeller inside the rotating bowl is protected wear resistant tungsten carbide tiles or overlaying welding materials. All the solids discharge ports are using tungsten inserts.

In order to guarantee the centrifuge running smoothly, every GN decanter centrifuge is tested 3 times by dynamic balance checking machine: 1st screw propeller, 2nd rotating bowl, 3rd rotating assembly. GN Solids Control has middle speed and high speed dynamic balance checking machines.

written by desander desilter

Jun 14

Features of GN Full Hydraulic Drive Decanter Centrifuge

Bowl MaterialDuplex  SS2304/SS2205 from centrifugal casting
Screw MaterialStainless Steel SS 304/ SS 316
Screw ProtectionTungsten Carbide Tiles
Solids DischargeTungsten Carbide Inserts
Bearing BrandSKF
FHD BrandSwitzerland Hydraulic Drive
Electrical ControlPLC Smart Control
Coating BrandCosco & Kansai Zinc Rich Epoxy Coating

GN can supply full hydraulic drive centrifuge to our client from our global network in China, USA, Russia and other international agent.

GN Solids Control just shipped 4 packages of fully hydraulic drive decanter centrifuges to Middle East. As one the world famous decanter centrifuge manufactures, GN Solids Control has been manufacturing different sizes of decanter centrifuges for many years.

20200609 FHD Decanter Centrifuge

Due to the oil price going down and the double effect of COVID-19, the global oil and gas industry is very slow this year. But GN Solids Control succeeded to provide more solids control and waste management systems when customers try to find the most cost-effective equipment. Until now, GN Solids Control has been provided solids control equipment as well as drilling waste management systems to over 70 countries and regions. Word of mouth highly reputation bring more and more orders to GN Solids Control. GN Solids Control has provided hundreds of in Middle East. Usually, orders from Middle East are large orders with strict and high technical demands. With these years fast development, GN Solids Control is always able to provide the decanter centrifuges beyond customers’ expectation as GN wants to take the extra step.

or the Middle East project, GN Solids Control provided 4 sets hydraulic centrifuges, the driven unit is Viscotherm and Rotidiff from Sweden. All these centrifuges are 14 inch bowl, which are made by centrifugal casting and using SS2205 or SS2304. Centrifuge screw propeller is protected by tungsten carbide tiles or build up welding. Besides the 4 sets centrifuges, GN Solids Control also provided 4 sets manual adjust screw pump. Actually GN Solids Control only use top brands, like the feeding pump main parts are made by Netszch.

written by desander desilter

Jun 14

GN Solids Control has been manufacturing shale shakers for decades. GN made shale shakers are widely seen in global drilling rig sites. As one important market for GN Solids Control, India has hundreds of GN shale shakers, mud cleaners, decanter centrifuges and cuttings dryers help customer on solids control and drilling waste management

2020.06.04 DMGS Shale Shaker

As we all know, when provide equipment to India especially to large Indian oil and gas drilling companies, DGMS is mandatory. For these shale shakers that GN Solids Control provided are all DGMS explosion proof certified. GN Solids Control also provides IEC or ATEX explosion proof control boxes suit for different market. 
GN Solids Control now has 3 manufacture plants: 2 close to Beijing International Airport and 1 close to Tangshan City. Now GN Solids Control are using automatic welding robot to weld the shale shake deck in order to keep the welding lines in a good and consistent quality. GN patent C type groove on the shaker deck fixed with oil resistant sealing rubber to keep the shaker screens from leakage. Working angle of the shake deck can be adjusted easily by using a lever to rotate from one side. 
These 4 sets shale shakes are all fixed with 3 pcs shaker screens, which are also made by GN Solids Control. GN shake screens are the most cost effective shaker screens and are certified by USA third party to guarantee the precise API parameters like cut point and conductance.  

2020.06.04 Double Shale Shaker
One of the most advantage of these shakers is every shaker can be moved under linear motion and elliptical motion: Linear motion is suitable for large flow rate drilling mud with low viscosity, high solids content, and big particles especially sturdy solids; while the elliptical motion is mainly used to treat drilling mud with easy broken, high viscosity solids. 
GN Solids Control only use top brands vibrators like USA Martin or Italy OLI, electrical components inside the control box are mainly Schneider. 
2 panels and 4 panels shale shakers can be also provided, and double deck shakers is optional.

written by desander desilter

займ на карту срочно без отказа онлайн займ на карту без отказа