займ на карту срочно без отказа займ онлайн
Sep 25

GN Solids Control has established an American branch company in Houston, TX., which name is GN Solids America. By the establishment GN Solids America, GN shows his willingness to develop the America Market and to serve customers in the America better. And with the fast development of drilling and drilling rigs in Canada, GN must have a bright solids control equipments market there.Now these years, petrol companies in Canada have developing the whole year drilling period. And they tend to use this whole year drilling to replace the traditional drilling plans in Canada. Although, the drilling crews are not growing largely, the usage of drilling rigs are all have a high using frequency. The quantity of drilling especially the natural gas drillings are reaching a new records number, and the permitted drillings are increasing day by day.

The drilling activity in the west regions of Canada are getting more and more active. However, drillings in the west sea are not approved. It seems that Canadian drilling crews don’t need to be confined to the drilling restrictions like America has them on the mid-land. As we all know, the American council forbidden to drill on the side of Great Lakes, on the other side, Canada allow the drilling companies drill and extract natural gas and they can also make directional drilling to collect oil near Lake Inari.
According to an survey, Ontario has drilled 69 wells in 1999, 112 wells in 2000, 115 wells in 2001, 82 wells in 2002, 88 wells in 2003, 72 wells in 2004, 22 wells in June, 2005.

GN Catalogue
According to the statistics of BakerHughes, Canada has 509 rigs are in using until August 26th, this number is decreased by 26 than last week, but it is increased by 230 than the beginning of this year. During these using rigs, EnCana has 55 rigs that are in using, Canada Natural Resource and Devon both have 30 rigs.
Although these numbers are not quite near, we could also tell the great development of Canada market. This is not the best time for GN Solids Control, but it will never be the worst days for GN.

written by desander desilter \\ tags: ,

Sep 21

Cellar Pump, we could also call it submersible slurry pump, mud guzzler, trash pump etc. How should we call it all depends on where we are in the world. Cellar pump plaies an important role in HDD mud cleaning system. Today, let’s talk something about it.

cellar pump

cellar pump

 

Location and Application of Cellar Pump

In a HDD (Horizontal Directional Drilling) project, the drilling mud overflowing from the drill hole is often guided into a mud pit or a lower tank which the drilling mud level is lower than the drilling mud cleaning equipments. Therefore, we need a device to transfer the mud from a lower place to a relative higher place, that is why we choose cellar pump. Cellar pump is used to transfer the drilling mud to the first stage mud cleaning equipment – shale shaker. To some extend, cellar pump is not one part of the complete mud cleaning system. It is a medium between the rig and mud system.

Continue reading »

written by GN Desander Desilter \\ tags: , , , , ,

Nov 26

Submersible slurry pump is usually used for HDD mud system, to pump drilling mud from mud pit to shale shaker. Usually we make the inlet pipe with fast union joint with size 4” or 5” or customized, and the length of inlet pipe could be customized.

To sum up, the GN YZ series submersible slurry pump is the ideal centrifugal pump for Feeding Shale Shaker from Mud Pit for HDD Mud Recycling system.

HDD slurry pump

HDD slurry pump

The max particle size of drilling fluids allowed for GN HDD slurry pump is 2cm, suited for delivering large particle slurry with rocks. The treating capacity from 40m³/h to 270 m³/h. The submersible length if no special requirements it will be 1.3~1.5m.

GN HDD Slurry Pump is the cantilever pump structure of single stage and single suction, with the bearing housing, supporting, intermediate pipe connecting the  pump hydraulic components, the water is discharged out from the drain pipe parts, pump impeller is for semi-shrouded with the agitating vane on the vane extended, the main characteristic of this pump is the underwater pump shaft parts have enough rigidity, the impeller and pump shell have no bearings, no shaft seal, which can transport the greater medium of solid particles. The length of inserting the water by slurry pump is between 800 and 2000, the suction pipe can be matched in case of need. The shaft seal runs into the underwater pump without setting up the shaft seal, drive should be installed the vertical motor on the supporting seat connecting with coupling and pump.

Continue reading »

written by GN Desander Desilter \\ tags: , ,

займ на карту срочно без отказа онлайн займ на карту без отказа