займ на карту срочно без отказа займ онлайн
Jul 16

It may looks similar to some other products, but GN invent this unit, and now applying our own patent. GN is only able to provide the ViST vacuum shaker screen system to fit on GN won shale shaker, but also on clients’ existing shale shaker.

As the name implies, the ViST vacuum shaker screen system is including a ViST vacuum unit connecting with a collecting pan that is installed under the last panel shaker screen at the solids discharge port.

The plan is use a hopper with an opening at the bottom where connect to the vacuum unit via a hose. When the drilling cuttings pass through the last panel screen, the remaining large quantity fluids on the cutting would be sucked and get through the shaker screen mesh to the hopper then to the vacuum unit. A buffer tank will be needed.

Why Choose GN ViST?

1. The Vist vacuum shaker screen system is suitable for OBM, WBM and SBM.
2. Recovered drilling fluids increased by 30%~50%, greatly reduces the discharge of drilling fluids. Per the drilling speed, the recovered drilling fluid is around 3 cubic meters per day. And the cost in transporting the waste will be greatly reduced.
3. Saving the cost in placing a High G force drying shaker on site, as the ViST vacuum shaker screen can make the discharged cuttings much dryer. The installation design will not need any extra area onsite.
4. By using the ViST vacuum shaker screen system, the mud engineer can put finer screen on the shaker which and separate the much finer cuttings.

Sorry can not reveal all the principle details, or release a handbook, now it is operating in a few sites, hopefully will be more and more. If you wanna join,  please feel free to contact with GN.

written by desander desilter

Apr 07

As the first China and taiwan manufacturers specialized in drilling waste management equipment, and  solids control equipment including shale shaker ,shear pump ,mud agitator, Mud Gas Separator etc.GN Solids Control owns rich practical experience in this field. Decanter centrifuge and vertical cuttings dryer are the main equipment with regard to drilling waste management. Following many years’ running in various jobsites, GN Solids Control has good understanding within the drilling waste decanter centrifuge and vertical cuttings dryer.
Big bowl decanter centrifuge is widely used to treat typically the drilling mud and drilling cuttings. GNLW553C-VFD is a huge bowl decanter centrifuge together with 22’’ bowl diameter. Among the main equipment from GN Solids Control company, it truly is designed and made per the most recent technology. GN solids control company typically offer the big bowl decanter centrifuge with good price in addition to top quality.

160325GNCD930E

Features of 22’’ decanter centrifuge, model GNLW553C-VFD
The actual GNLW553C-VFD high-performance centrifuge comes with a 18 inch height bowl. The centrifuge design is with a length through diameter ratio of 3. some: 1 .
The centrifuge is actually fitted with a 75hp primary drive motor and a immediate coupled 30hp back-drive electric motor. The main drive motor and also back drive motor are usually mounted at one conclusion of the centrifuge. This layout can minimize the centrifuge footprint.
The explosion evidence motors and control panel can be certified to use in ATEX Zone 1 / Region 2 hazardous locations, IECEx Zone 1 / region 2 hazardous locations, CNEx Zone 1 / Area 2 hazardous locations. Several EX certificate, price as well as leading time are much distinct. Clients can choose the suitable EX LOVER standard per the work site request.
The GNLW553C-VFD decanter centrifuge is fitted with primary bearing temperature and coup sensors which give the GNLW553C-VFD improved levels of safety and satisfaction monitoring features.

Usage of 22’’ decanter centrifuge, model GNLW553C-VFD
The big bowl centrifuge is made for removal of low gravity solids from the fluid system in reduced operating costs.
1) The big bowl centrifuge can often treat water base mud and drilling cuttings
2) The big bowl centrifuge enables you to treat oil base mud and drilling cuttings
3) The big bowl centrifuge can be utilized in dewatering unit
4) The big bowl centrifuge enable you to recovery barite from drilling fluids

written by GN Desander Desilter \\ tags: , , , ,

Mar 08

In this article, we will mainly introduce the SHAKER SCREENS that GN Solids Control could manufacture and provide.

 

For the SHALE SHAKER, the SHAKER SCREEN belong to 1 of the core parts, meanwhile, it is also as a wearing part and needs to be replaced regularly and the requirement quantity is large if the work frequency of shale shaker is high.

 0301040

As a top manufacture of solids control equipment on the world, GN could manufacture complete line of solids control equipment. The SHALE SHAKER & SHAKER SCREENS are also included. 

0301030

GN has its own plant for manufacturing the SHAKER SCREENS on the Asian largest wire mesh center city.

Actually, GN could not only provide the screens used on the shaker manufactured by GN-self, but also provide the replacement shaker screens for shakers from other brands like Derrick, Mi-Swaco, Nov-Brandt, Kem-Tron.

 

In 2015, there were 20,000.00 pcs replacement SHAKER SCREENS for Derrick, Mi-Swaco, Nov-Brandt brands sold to global customers according to the calculation. It has been over 9 years from 2007 year that GN Solids Control was founded until now, the time and practice have proved the quality.

 

Compared with the original SHAKER SCREENS from Derrick, Swaco, Nov-Brandt and Kem-Tron, the SHAKER SCRRENS, the Shaker Screens manufactured by GN Solids Control have not only same shape, good quality and good performance at work, but have a competitive price.

 

From 2015 year until now, the global economy has been suffering and the crude oil price is at a low rate. The cost control becomes more and more important for the enterprises in drilling fields, so using the replacement SHAKER SCREENS manufactured by GN Solids Control become a wise selection.

 

In 2013, GN Solids America LLC was founded in Houston City of USA, which is the 1st and biggest USA-based solids control equipment manufacture from China. And almost all the equipment are constantly in stock to facilitate the customers.

 

Finally, if you want to learn more about GN’s Centrifugal Pump, welcome to visit GN’s website and contact us.

Webhttp://www.gnsolidsamerica.com

Email[email protected]

written by GN Desander Desilter \\ tags: , ,

Jan 18

In this article, we will mainly talk about GN shale shakers with different treatment capacities, different types of Shaker Screen for customer option.

1. GN Shale Shaker with different Treatment Capacities.

GN Shale Shaker

GN Shale Shaker

 

As decided by different drilling rigs and well depths, the needed drilling fluid volumes are also different. GN’s Shale Shakers have different drilling fluid treatment capacities for customer option. The details are as below,

2. GN Shale Shaker with different types of Shaker Screen.

As the necessary part of 1 complete shale shaker, GN has many different types of shaker screen with high quality and competitive price for customer option. Besides, the shaker screens that GN manufactures could not only be used on GN’s shaker, but also could substitute most of the screens made by other solids control companies on the global market.

If customer has the requirements for substituting the other company’s shaker screen by using GN’s, it is just needed to provide the specific dimensions, the mesh number, the original shape, and the free samples could be sent for trying. The details are as below,

2.1.GN Steel Frame Screen

GN Steel Frame Shaker Screen

GN Steel Frame Shaker Screen

The steel frame screens are most applied to the shale shaker. The screen frame adopts high-strength square steel tube welded to multi-ribbed construction. They are sturdy and reliable. The screens are constructed with 2 or 3 stainless steel layers bonded to a steel support plank.

2.2.GN Pyramid Screen

GN Pyramid Shaker Screen

GN Pyramid Shaker Screen

 

This type of screen is the replacement product of flat screen. The effective area is 125% to 150% of flat screens. Without changing the construction of shakers, the using of the screens can improve the quality of drilling fluid and increases the production.

Screen has typical mesh cloth that appears regular waves. And it can be mounted on suitable shaker by hookstrip or wedge-shape fastening device. As compared to flat screens, this screen has higher treatment capacity by reason of more useful area.

2.3.GN Composite Screen

GN Composite Shaker Screen

GN Composite Shaker Screen

written by GN Desander Desilter \\ tags: , , , ,

Dec 28

GNZS703E is a 3-panel single deck shale shaker with linear motion. The shaker model is designed and made by GN leading solids control manufacturer – GN Solids Control. GNZS703E is the latest design of GN 3 panel single deck shaker.

Applications of GNZS703E shale shaker

1) The shaker can be used for oil and gas drilling, used as the first step solids control equipment.

2) The shaker model can be used in compact mud recycling system for horizontal directional drilling (short name: HDD), water well drilling, coal bead methane (also called CBM drilling).

It can also be used in other underground construction system as pre-separation, to remove the solids.

GN shale shaker

Extended models of GNZS703E shale shaker per different feeding type

Option 1 is top feeder; relative shaker model is GNZS703E-DZ.

It is designed for oil and gas drilling field. As in oil and gas drilling field, the dirty mud from well head will be transferred by pumps through pipelines. They do not use mud pit for storage. And mud pumped from well head will flow to the shale shaker feeding box through the pipelines and fall down directly to shale shaker under the gravity.

In this case, the back feeding type can reduce the height for feeding.

Option 2 is back feeder. It is specially designed for HDD and water well drilling.

As in HDD, CBM or water welling drilling, the system is compact and mud tank will not be big side. Top type feeding shaker is with a smaller footprint. East for layout.

In this kind of drilling, there is commonly a mud pit around the drilling rig. The dirty mud from well head will be pumped to mud pit first , and then transferred to mud system shale shaker by a slurry pump.

Other application of GNZS703E shale shaker

The shale shaker can be combined with desander cone assembly and/or desilter cone assembly to used as desander separator, desilter separator or mud cleaner.

written by GN Desander Desilter \\ tags: , , , , , ,

Dec 22

GN Solids Control is famous for the best manufacturer on solids control and drilling waste management. As more and more countries are experiencing strict environment protect principles, GN solids control as well as drill cuttings management gadgets are more widely used in the world world. Now clients via more than sixty countries are utilizing GN equipments for different mud control or slurry separation.
For the water bottom part mud, GN has a couple of main equipments or techniques can be used:
1 . GN Cuttings Dryer
GN vertical cuttings dryer is especially designed for WBM, OBM or SBM healing. It’s especially useful with oil base cuttings separating. For the water base mud, GN has also provided quite a few sets cuttings dryer. Inside the first half year, GN provided one whole punch cuttings management systems for you to Cyprus for water foundation mud treating.
According to the responses from this client, they are quite satisfied with the working performance. For any slurry discharged from Cuttings Dryer, it can be also foodstuff into the decanter centrifuge for more separation.

GN decanter centrifuge 2 . GN Hi-G Drying Shaker and GN Decanter Centrifuge
GN Hi-G shaker has a large Grams force will can achieve 8. 0 G. With this particular large vibrating force, solids and water can be split up effectively. GN also produces various shaker screens, like replacement Mongoose screens, substitute Derrick screens. GN shaker screens are also widely used through many large drilling firms. Now GN Houston storage place has many shale  shaker screens with stock, welcome to visit us make a trial order.
GN decanter centrifuge are used to separate every one of the fluids come out from Hi-G shaker. Particles larger than 2~5 microns can be separated away by GN decanter centrifuge. This year, GN also offers some sets GN Hi-G Shaker and GN Decanter Centrifuge for world clientele, such as CNPC and Eu client. For details, booking the following links.

written by GN Desander Desilter \\ tags: , , , ,

Dec 16

GN Solids Control centrifuge is high quality with reasonable price, centrifuge operation is also very important. And it require operator with many years experience or with training certificate from professional centrifuge supplier. In many cases, centrifuge problem is because of non-professional operation, not centrifuge itself.

For example, one centrifuge is used for treating the mud after vertical cuttings dryer. The mud discharged from vertical cuttings dryer is very heavy mud with high density, viscosity and not good flowability. In this case, if you feed the centrifuge directly, the feed pump will not work well and the centrifuge is easy to trip off. Our suggestion is the client can design one holding tank between the vertical cuttings dryer & the centrifuge, install one agitator in the mud tank to suspend the drilling mud and adding water if necessary to lower down the density of the mud. The centrifuge will surely working very fine under professional operations.

Another, vertical cuttings dryer block and trip off sometime, why?  This is self protection of the vertical cuttings dryer when faced with wrong operation. We recommend the engineers to select the proper material for dryer. For example, it is not good to use vertical dryer to treat the mud waste discharged from mud cleaners & centrifuge. Because the separation point of the vertical dryer is about 0.5mm; however, the particles discharged from mud cleaner & centrifuge is much smaller than 0.5mm, around some hundred microns or even smaller than 100microns. In this case, the vertical dryer screen basket is easy to block, not good performance. The vertical cuttings dryer is very picky, it can only treat the drilling cuttings discharged from shale shaker.

Except for centrifuge and dryer, other equipment like shale shaker, mud cleaner, agitator, centrifugal pump is much easier operation. The shaker have to use proper deck angle and replace the shaker screens when necessary, mud agitator need to add gear oil for the gearbox, the centrifugal pump also need lubrication oil. Pls follow the instructions on label or user manual to do correct oil lubrication.

written by GN Desander Desilter \\ tags: , , , ,

Dec 04

GN API replacing shaker screens are widespread in various shakers for raising the throughput capacity and increasing the lifespan. GN shale shaker screens are effectively accustomed to keep the drilling fluids inside a good quality, reduce the drilling cuttings volumes and cut the particular separation cost.
GN technicians are keeping upgrading these kind of shaker screens in order to provide top quality products. Now GN Solids Control manufactures over 7, 000 pieces shaker displays every month.
From API twenty to API 400, GN Solids Control is using SS304 or SS316 to make several layer. All of GN shaker screens are manufactured conform to the particular API standard.
1 . GN Metal Frame Shaker Screen
GN metal frame shaker screens are effectively utilized in many oil and gas worksites a result of the excellent separating performance and also sound quality.
GN metal structure screens are alternative with regard to Mi-Swaco Mongoose, Mi-Swaco D380, Derrick PWP (flat type)/ PMD (pyramid) screens, NOV/ Brant VSM300, NOV/ Brant King Cobra, FSI model etc .
2 . GN Blend Shaker Screen

Steel-Frame-Shaker-Screen
GN upvc composite shaker screen is an replacement for GN steel frame shaker screen. GN uses cutting edge composite material screen technologies that combine many layers with various mesh measurements.
GN composite screen characteristics:
2 . 1 It’s all-around 40% lighter than material frame screen.
2 . only two Working area is bigger than steel screen.
2 . a few Higher treating capacity as well as separating performance.
2 . some Dramatically extended working lifetime to save cost.
2 . 5 various Higher resistance to corrosion in comparison with metal screen.
GN amalgamated screens are replaceable intended for Mi-Swaco Mongoose, NOV/ Brant VSM300, NOV/ Brant Ruler Cobra, Derrick brand displays.
3. GN Hook Deprive Shaker Screen
Hook deprive screens are including tough hook strip flat shaker screens and hook strip pyramid screens. GN shaker screens are can also be maintained through the use of special rubber plug.
GN hook strip shaker screens are mainly used to replace Derrick 500 FLC screens as well as Derrick 2000 FLC monitors and Mi-Swaco ALS displays.
GN also manufactures tailored shaker screens or REFILL screens for worldwide clientele, welcome to place a trial get for testing.

written by GN Desander Desilter \\ tags: , ,

Nov 27

While China leading manufacturer with regard to solids control mud system, we committed to promote the caliber of equipment & quality regarding contract & quality associated with after sales service. Equally overseas clients & local clients witness the growth involving GN Solids Control; depend on GN high quality equipment as well as service, repeated order implemented continuously.

mud mixing tank-1
Recently, we conclude one set mud mixing system for South America Client. They use this mixing system to perfect liquid mud plant. The client is GN VIP client with through 3 year’s relationship; they have got used our shale shaker, decanter centrifuge, agitator, centrifugal pump before. Mainly tools of this order including:
1) Mud recycling tank system
2 sets decanter centrifuge, GNLW363CG Premium centrifuge. Designed with 3200rpm high speed belt pulley, the centrifuge can distinct fine solids above 2-5 microns.
2 set submersible slurry pump, GN50YZ20A-18 expensive slurry pump to give food to for decanter centrifuge.
just one set Shale shaker, GNZS594E-HB premium shaker with long decks 4 panel shale shaker screen. The shaker screen is actually composite material screen (carbon steel frame shaker screen for option) with extended lifetime and better performance.
a single set mud recycling tank with dimension 12192x2438x2590mm. Identical dimension as 40ft basic container. Electrical control panel system & tank gadgets also included.
2) Mud mixing tank system
3 units mud recycling tank together with dimension 12192x2438x2590mm. Same shape as 40ft general gift basket. Electrical control panel system & tank accessories included as well.

2 sets shear pump, GNJQB6x5A-550 shear pump mounted under water based mud / oil based mud operations platform to shear often the chemical big particles.
several sets centrifugal pump, GNSB6x5A-12J each centrifugal pump for every single mud tank.

centrifugal pumps
Other products including mud hopper, mud agitator, mud gun, levels monitor, lighting system and so forth
GN Solids Control devices are working in over 60 international locations & areas. Our PREMIUM client including but not restricted to Baker Hughes, CNPC, SINOPEC, OGNC, CPVEN, NIDC, COVER etc . If you are in need of solids control equipment & going waste management equipment, please contact us freely.
GN Solids Control head office: Beijing region, China; 40KM to Beijing International Airport
GN Solids America office: 6710 Windfern Highway, Houston, TX 77040, UNITED STATES OF AMERICA
GN Solids Russia place of work: Г. Москва, Радонежского Сергия Ул. д. 2

written by GN Desander Desilter \\ tags: , , ,

Nov 17

Generally speaking , the shaker screen on the shaker will separate solids the that larger than it’s screen opening size and retain the drilling mud and smaller solids .When 50 percent of solids size being found in the underflow of the shaker screen and 50 percent of the solids of that size found in the over flow , that size is call D50 or 50% cut point . The cut point is a graphical representation of the actual measured separation of drilling solids made by the shaker screen . For example , a D20 cut point will be the size where 80% of the solids particalsiin that size that returned to the drilling mud through shaker screen and 20% of the size solids separated by shaker screen .

Shale Shaker for UAE

There are several reasons that may cause a shaker screen performance failure . Most of the failure result from the improper shaker screen installation or damage on the shale shaker . The crack or warp shaker bed may result from to long time of continuous use or improper maintenance which will cause poor vibration patterns . To achieve max screen life , all the tension bolts must be operating properly . If early screen failure occurs , please check and make sure that one or more of the tension bolts are not missing and keep sure they are tightened correctly as per manufacturers recommendation .

Another possible cause of the improper solids conveyance , and then , screen wear is the linear motion vibrators running in the same directions , which will cause an improper vibration pattern , the result in massive amounts of solids accumulating on the first screen ,causing them to wear quickly . This can easily be remedied by reversing the electric wiring to the motors and vibrators of the shale shaker should be tested before spudding the well .

Composite-Frame-Shaker-Screen

GN Solids Control sell a series of solids control equipment and drilling waste management equipment including vertical cuttings dryer , shale shaker , screw conveyor , screw pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , poor boy degasser , decanter centrifuge.etc. Welcome you contact GN group freely.

written by GN Desander Desilter \\ tags: , , , ,

займ на карту срочно без отказа онлайн займ на карту без отказа