займ на карту срочно без отказа займ онлайн
Apr 06

Water properly drilling rigs are popular for oil and gas drilling industry, for normal lifetime as well as industries.
Take the oil and gas drillingfor example , water is the needed material for drilling actions. Water is request for you to for drilling fluids mixing, for tank cleaning, intended for flush, for equalizing nicely pressure, etc… There will be different ladies involved for drilling routines; Water is also the essential substance for the rig peoples. Often the rig sites are normally a long way away from human area. Effectively well drilling is the most rapidly and most convenient way for water supply.
GN Solids Control engineer just came back from the middle east job web-site. He finished the first time ordering and training of 1 fixed GNMS-500G water well drilling mud system. The 500GPM mud system is design and style and made for their oil rigs.

2015.05.27_500gpm_mud_system
The system is composed of just one deck linear motion shale shaker, a hydro cyclone desilter separator, a drillingfluids mud mixing system, giving pump, mixing pump, the particular explosion proof electric control system, trailer skid mud tank and electrical lights systems.
For a compact design and style, GN put the feeding pump for hydro cyclone desilter, and the mud mixing pump on the skid.
In order to get an even bigger usable capacity, GN developed the mud tank together with 3 m width. With China, but also in many various other countries, 3 m may be the normal width limitation regarding inland shipment. GN produce all the sand gates build-in type. In this case, it will not on the tank width scope.
Customers request a mobile model for fast movement. Just to save the cost of clients, GN Solids Control recommend client in order to source trailer skid hereabouts and buy complete mud system from GN. GN Solids Control customize the system suitable for trailer skid. You will find container corner blocks each and every tank corner. The tank can be out and straightened on the trailer skid such as a container.

written by GN Desander Desilter \\ tags: , , , ,

Oct 20

1. To make sure the operation of the shale shaker and normal usage life on screen, the operator need to make sure parts like wedges, screw cap bolt and springs on the shale shaker are installed correctly with no signs of wrongdoing. The operator installs the screens according the operation manual provide it from the seller.
2. To get full usage of the pre-tension shale shaker screen, operator need to ensure the rubber parts of the shale shaker is fully intact and show no sign of damage. Shale shaker screen is wear and tear parts and it will be needed for replacement after normal usage. If wear-down speed is faster than normal, then check all the moving parts of shale shaker is functioning properly and secure the screens correctly.
703 Shale Shaker 2
3. Lubrication and consist maintenance the shale shaker moving parts base on the operation manual is the must to ensure proper operation.
4. If the operator uses an OEM shale shaker screen that have not been pre-tension treatment, it is the must step that need to perform before usage.
5. If the drilling fluid flow out of the pore or damaged place, then cuttings can’t be removed. Any screen with holes or be damaged must be changed immediately, the hole and the damaged place can be sealed up by the panel. The screen must be changed as soon as possible, make a plan before the replacement to reduce the stopping drilling time, you should prepare the tools and screen before beginning to replace, if because the shale shaker is not operating, it will increase the cuttings content. It’s best to exchange the screen in a single period if possible. Need to stop the pump at the emergent time, stop drilling so as to replace the screen of shale shaker.
6. Any problem please fell free to contact us and learn to know our other products including mud agitator, decanter centrifuge, desander, mud tank ,drilling waste managent, drilling mud system etc.

written by GN Desander Desilter \\ tags: , , ,

Apr 11

GN Solids Control just exported to mud cleaning system to European, which including shale shaker, mud cleaner, centrifugal pump and jet mud mixer

Mini Solids Control System

1. One set of GNZS752E-DM shale shaker with two panels shaker screen.710mm low weir height is easily for cutting transport to shaker

2. Desilter consist of 4 desilter cones and one set GNZS752E shale shaker, which is small capacity

European market has really high standard and stringent rules for the oilfields equipment. However, GN has proved our equipment quality to the world again. GN is the first API certification solids control equipment manufacturer in China. Also, GN Solids America LLC is the first USA based solids control company from China, with branches in USA, Australia, Latin America, and Middle East.GN has exported waste management equipment over 60 countries. All of the results showed us that GN is striding to world and service different country.

In the future, we will be based on the high quality, fast service and convenient spare parts to service the world. Our client is very satisfied with our equipment, and cooperation will be continued between us and European buyer

written by GN Desander Desilter \\ tags:

Nov 30

Mud transfering centrifugal pump in GN’s product line range from 20~320m3 by flow. This centrifugal pump is designed to handle abrasive, viscous and corrosive fluids in drilling or industrial slurry applications. Comparing with conventional pumps, GN’s centrifugal pump has an exceptional performance by large volume, high temperature capabilities and easer to maintenance.

GN Mud Transfering Centrifugal Pump

Centrifugal Pump Structure and Parameters

With outlet 2″-6″, GN’s centrifugal pump has a head capacity range from 12m to 62m. It could be working well in the tempreture span of 100℃(-40℃~60℃).
Strong and thick pump housing design of ring runner shape to eliminate the turbulence and cavitation within the pump housing. The small distance between the impeller and the housing to be the same at all points as the centrifugal design.
In order to reduce the turbulence, lower radial and thrust loads, and provides a smooth flow of fluid through the pump, the impeller is designed for open-vane. Aslo thie design allow fluid leaving the impeller to blend with recirculating fluid to reduce abrasive wear of the casing. By using O-type oil seal to protect the no exposed shaft threads, the lifetime of the pump largely extended.
Worth to mention is that all GN centrifugal pump is using mechnical seal. All metal parts are made of 316 stainless steel. Elastic part are manufactured from viton. Both rotating and stationary seal faces are tungsten carbide.

Centrifugal Pump Functions

For drilling application, GN centrifugal pump could be used for mud transfering, mud mixing and shearing operations, desanding and deislting, degassing, supercharging, centrifugal feed, mud cooling tower and wash down.

In solids control system, GN’s centrifugal pump has below applications:

  • Mud transfering  By locating the centrifugal pump on the mud tank skid, the drilling mud could be transferred from tank shaker compartment to the Mud Cleaner for treatment by hydrocyclone.
  • Mud Mixing   Combined with a venturi type hopper,  the centrifugal pump could be used to shear the bentonite powders and mix the new clean drilling mud.
  • Charging pump   Connected with the mud pump unit, centrifugal pump could transfer the clean mud to mud pump, then from mud pump back to the drill rig.

Besides the mud transfering pump, GN could also offer slurry pump, mono pump for Decanter Centrifuge, and shearing pump for shearing large drilling fluids chemical particles. For more information about GN mud transfering centrifugal pump, please leave a message or contact with us.

written by GN Desander Desilter \\ tags: , , , , , , , , , ,

May 29

In GN products line, centrifugal pump is one of the main equipments that got many order for GN. All the working for transfering the mud in recycling system is done by pump.

Centrifugal pump

Mud cleaner is one type equipment which need centrifugal pump transfer mud into the cyclone to complete its mission. In mud mixing unit, centrifugal pump could be used to transfer the mud into all the storage tank. Mud pump also need centrifugal pump to feed drilling mud.

Bare Pump

 

GN’s centrifugal pump is interchangeable with famous NOV Mission pump which is a very good selling point. Welcome contact with GN for more information about this centrifugal pump.

written by GN Desander Desilter \\ tags: , , , , ,

Mar 10

In 1 set complete drilling mud cleaning system, we could find six pipeline system. They are Overflow launder pipeline, clean water pipeline, mud gun pipeline, active mud suction pipeline, mud mixing pipeline and drilling hole mud replenishment pipeline.

Overflow launder pipeline is the most important pipeline in the mud system. From the Shale shaker compartment fo the tank, there will be a launder uphill through the desander tank, desilter tank in order to prevent the drilling mud overflow out of the tank.

The clean water pipeline is used to clean the tank, it is connected with the clean water tank or a water faucet and installed opening controled by valve in each tank.

Mud gun is always powered by mud pump in a mud system for oil drilling rig. The high pressure could transfer the active mud to each tank from the begainning of the desilter tank to make the replenishment or prevent the mud sediment. While in small mud systme, the mud gun often powered by mixing pump. Some mud system will have a trip tank, also we will install mud gun there.

In large mud system, mud pump could suction the active mud from every tank behind the desander tank. All the tanks storaging active mud is connected by the mud suction pipeline.

Mud mixing pump is used to mix the drilling mud in the tanks. Where there is the active mud in the tank, the mixing pump could suction it, after treatment by adding some drilling chemical then transfer them back by mud mixing pipeline.

the drilling hole mud replenishment pipeline is connected to wellhead, when the drilling bit raise out of the hoel, the drilling mud will be pump into the drilling hole to keep the well pressure and protect the well wall. When the drilling pit again down, the drilling mud will backflow to the trip tank.

The above mentioned six pipeline system could be find in 1 set complete large mud system and all of them functioned irreplaceable. Welcome for your comments and let’s learn it together

written by GN Desander Desilter \\ tags: , , , , ,

Dec 09
Centrifugal Pump with Control Panel

Centrifugal Pump with Control Panel

Shortly before,we sent one set SB6x5-12 centrifugal pump with control panel to our Indonesia customer. They are a drilling company, and have their mud recycling system on their work site. After find our products from the internet website, they contact with us and plan to have a try for our products. Happend to that they need a charge pump for their 44OHP mud pump. After some communication on the phone and through the mail, and their once visit to our factory, they placed the order.

This set SB6x5-12 centrifugal pump is consist of Pump head, 37KW electric motor, independent control box.  All the parts are mounted on a skid. Comparing with our usual installation, we did’t weld the the control panel fixed on the skip, but bolt it so that it could be uninstalled easily.
Continue reading »

written by GN Desander Desilter \\ tags: , , ,

Dec 25

Triplex mud pump is a reciprocating piston/plunger device designed to circulate drilling fluid under high pressure (up to 7500 PSI) down the drill string and back up the annulus.

Mud pumps come in a variety of sizes and configurations but for the typical petroleum drilling rig, the triplex (three piston/plunger) mud pump is the pump of choice. Duplex mud pumps (two piston/plungers) have generally been replaced by the triplex pump, but are still common in developing countries. A later development is the hex pump with six pistons/plungers.

Chinese Triplex Mud Pump

Chinese Triplex Mud Pump

Mud pump consist of two main parts, the fluid end and the power end.

The fluid end produces the pumping process with valves, pistons, and liners. Because these components are high-wear items, modern pumps are designed to allow quick replacement of these parts.

To reduce severe vibration caused by the pumping process, these pumps incorporate both a suction and discharge pulsation dampene. These are connected to the inlet and outlet of the fluid end.

The power end converts the rotation of the drive shaft to the reciprocating motion of the pistons. In most cases a crosshead crank gear is used for this.

National Oilwell Varco’s F-1000 Mud Pump is rated at 1000 input horsepower (746 kW) at 140 strokes per minute, with a 10-inch (254 mm) stroke.  Multiple liner sizes allow pressures and volumes to handle circulation requirements in deep drilling applications.

F1000 MUD PUMP PACKAGE
1 F1000 Triplex Mud Pump
Product package consists of:
1 F1000 Bare Pump
F1000 Bare Pump
National Oilwell Varco Bare F1000 Triplex Mud pump 63/4 inch bore X 10 inch stroke rated for
1000 input horse power includes:
Three interchangeable forged steel fluid ends
Threaded valve pot covers
Cast crankshaft
Discharge Strainer Cross with strainer, blinder flange, studs and nuts
Suction and discharge manifolds
greater than API lb 6inch Valves & Seats installed
6inch Liners and Pistons
Discharge Dampener,
Shipping skid (not master skid)
Does not include:
Liner spray system
Jib crane
Tool set

Continue reading »

written by GN Desander Desilter \\ tags: ,

Apr 16

Mud pump used closely to solids control system for drilling well. We often sell Triplex single acting mud pump together with our drilling fluids solids control system.

We will use this mud pump in 2 cases.

1- jetting fluid from cellar

 The head is 3-4 m & suction head is almost 0 (The mud pump will lay in parallel with the tank & there is no head between the mud pump suction & the tank discharge lines)

2- removing cutting fluid from cellar during drilling

The head is 3-4 m & suction head is 4-5 m 

 Following is the parameter for 350HP mud pump.

Model Type Input power Supporting force Rated speed pump stroke length
N3NB-350 Triplex single role 350Hp 6190ZC-1(Diesel Engine) 120Stroke /min 180mm
Rated input speed (r/min) Axle rated speed (r/min) Suction Pipe Diameter Y400-6.28KW (Motor) Dimension(mm) Weight
582.8 540 203mm Discharge Pipe Diameter 76mm 3100×2080×2015 8.058t

 

 

 

 

Continue reading »

written by GN Desander Desilter \\ tags: ,

займ на карту срочно без отказа онлайн займ на карту без отказа