займ на карту срочно без отказа займ онлайн
Jul 16

It may looks similar to some other products, but GN invent this unit, and now applying our own patent. GN is only able to provide the ViST vacuum shaker screen system to fit on GN won shale shaker, but also on clients’ existing shale shaker.

As the name implies, the ViST vacuum shaker screen system is including a ViST vacuum unit connecting with a collecting pan that is installed under the last panel shaker screen at the solids discharge port.

The plan is use a hopper with an opening at the bottom where connect to the vacuum unit via a hose. When the drilling cuttings pass through the last panel screen, the remaining large quantity fluids on the cutting would be sucked and get through the shaker screen mesh to the hopper then to the vacuum unit. A buffer tank will be needed.

Why Choose GN ViST?

1. The Vist vacuum shaker screen system is suitable for OBM, WBM and SBM.
2. Recovered drilling fluids increased by 30%~50%, greatly reduces the discharge of drilling fluids. Per the drilling speed, the recovered drilling fluid is around 3 cubic meters per day. And the cost in transporting the waste will be greatly reduced.
3. Saving the cost in placing a High G force drying shaker on site, as the ViST vacuum shaker screen can make the discharged cuttings much dryer. The installation design will not need any extra area onsite.
4. By using the ViST vacuum shaker screen system, the mud engineer can put finer screen on the shaker which and separate the much finer cuttings.

Sorry can not reveal all the principle details, or release a handbook, now it is operating in a few sites, hopefully will be more and more. If you wanna join,  please feel free to contact with GN.

written by desander desilter

Jul 08
For a long time, in the market, if anyone need any centrifugal pumps, they only know Mission Magnum, which is the most popular one in the oilfield, especially for drilling projects. Lots of people only know mission pump for most of the function, for mixing, for transfer, for drilling mud trip back etc. Now another option comes, GN Centrifugal pump, fully repalceable with magnum pumps, with even better material to cast the main parts, casing, impeller, and even the frame, soon will be modularized by casting.
Recently, GN finished the fabrication of a batch solids control equipment ordered by an oilfield service company from Venezuela. More than 10 units drilling mud centrifugal pump are part of the order and already packed waiting for delivery.

GNSB Series Centrifugal pump is used for transferring slurry or mud or water. It can be used as feeding pump for desander, desilter, or used as mixing pump for Jet Mud Mixer. Also it can be used as trip pump, and supercharging pump for rig mud pump. All GN model centrifugal pump use tungsten carbide mechanical seal, with famous brand Bearing. And spare parts interchangeable with most of the international Brand pump which helps customer to source spare parts easily. Open impeller design that lowers axial thrust loads, and make it easier for installation, repair and maintenance.
Main features of GN pumps:
All spare parts interchangeable with most of the international Brand pump which helps customer to source spare parts easily
Thick, Strong Concentric casing provides extended life over conventional volute designs. The Concentric design minimizes turbulence and abrasive wear.
Pump casing made from hard ductile iron alloy, increased abrasion resistant capability compared to competitors pump.
Wide open-vane impeller creates lower axial thrust for improved bearing life.
Pump impeller made from hard ductile iron alloy, extended life over competitors design.
Anti-loosening impeller lock bolt to eliminate pump damage in case of improper motor hook-up.
High quality no-adjustment mechanical seal to provide zero leakage and longer operation life.
Replaceable shaft sleeve prevents shaft wear.
All bearings from top brand for reliable operation.
The skid for supporting pump and motor is made from casting instead of welding to provide reliable operation and less vibration in a result to extend the pump and motor life.
Contact with GN if any related inquiries.

written by desander desilter

May 24

GN Solids Control is China leading make for solids control products & drilling waste management products. We’ve been working in this field over 9 years, and the prosperous experience and professional get to be the power to enlarge GN effect in the domestic market in addition to overseas market. Up to now, GN already has GN Solids America facility, GN Solids Russia facility in operation. Regarding other areas, we have GN spouse or dealer to help market place the local market and share solids control equipment to get urgent projects.

GN Solids Control also attaches importance in Africa market. The Cameras oil field requirement can also be very large. As the huge industry and sensitivity of selling price, GN Solids Control effectively enters Africa market with good quality equipment and sensible price. One client instructed us” so far, the decanter centrifuge is working really fine with the heavy mud, but the other people at the rigsite are curious how long moment the good performance will last “. The decanter centrifuge is readily worked in Algeria over one years. So far so great.

We also have one consumer from Argentina who individual over 30 sets decanter centrifuge from us. The highly effective partner work for Baker Barnes and have his own mud company. The professional service along with good relationship help the customer occupy a large percentage of the local sector at mud service location. The clients also acquire some sets of top to bottom cuttings dryer to expand the service scope.
750HPDrillingMudSystem
Within Australia, we have partner TT Asia who is dealer to get VERMEER, the famous drilling device brand. They buy mud system from us as well as match with Vermeer rigs. Solely in 2012, the client ordered about 10 sets mud mixing system from GN Solids control.

Why we can include so many clients and continuous buy from us? Because of the high quality equipment reasonable price as time after sales services.

written by GN Desander Desilter \\ tags: , , , ,

May 16

Mud cleaning system is two main parts, the storage mud tank on below and many machines serve as purify the drilling fluid, which get rid of the solid debris in drilling fluid. The mud tanks which store drilling fluid are divided into circulation tanks and store tanks. Circulation tanks as a part of the filter cycle, there are shale shaker, vacuum degasser, deserter, and desander and decanter centrifuge on the top of tank.

The 1st level of purification
the drilling mud pumped away from the rig and flow-down in the shale shaker. The allocation drilling fluid enter into the bottom of the drilling well under the foundation of the drilling pump and carry drilling debris return the ground, through the elevated tubes enter into the shale shaker, the larger solid debris in drilling fluid are filtered through screen

Desander with GNZS752 Series Mini Shale Shaker

The2nd level of purification
When drilling fluid have debris contain gas, The use of vacuum degasser remove the gas which in the drilling fluid and can recover the density of drilling fluid, calm the drilling fluid viscosity.

The 3rd level of purification
the drilling fluid is disposed by two levels, mud purification enters into the desander.  Through the desander feed into the liquid pump, the harmful sold phase which the diameter is above 40-60um is separated in desander.

The 4th level of purification
the drilling fluid is disposed by the three level purification enter into the desilter through the desilter feed into the liquid pump, the harmful sold phase which the diameter is above 15-40um is separated in desilter.

The 5th level of purification
The drilling is disposed by the four level purification enter into the decanter centrifuge through the centrifugal feed liquid pump, the small harmful sold phase particles are separated in decanter centrifugal.

Usually, all five purification is all working at the same time. If it works one equipment or several equipments, the parameters of the drilling fluid can all meet the work requirements; it can work in one equipment or in several equipments. After the purification, drilling fluid can re-use in the drilling cycle

More informantion about drilling mud system , pl feel free to contract GN solids control.

written by GN Desander Desilter \\ tags: , , , ,

Apr 07

As the first China and taiwan manufacturers specialized in drilling waste management equipment, and  solids control equipment including shale shaker ,shear pump ,mud agitator, Mud Gas Separator etc.GN Solids Control owns rich practical experience in this field. Decanter centrifuge and vertical cuttings dryer are the main equipment with regard to drilling waste management. Following many years’ running in various jobsites, GN Solids Control has good understanding within the drilling waste decanter centrifuge and vertical cuttings dryer.
Big bowl decanter centrifuge is widely used to treat typically the drilling mud and drilling cuttings. GNLW553C-VFD is a huge bowl decanter centrifuge together with 22’’ bowl diameter. Among the main equipment from GN Solids Control company, it truly is designed and made per the most recent technology. GN solids control company typically offer the big bowl decanter centrifuge with good price in addition to top quality.

160325GNCD930E

Features of 22’’ decanter centrifuge, model GNLW553C-VFD
The actual GNLW553C-VFD high-performance centrifuge comes with a 18 inch height bowl. The centrifuge design is with a length through diameter ratio of 3. some: 1 .
The centrifuge is actually fitted with a 75hp primary drive motor and a immediate coupled 30hp back-drive electric motor. The main drive motor and also back drive motor are usually mounted at one conclusion of the centrifuge. This layout can minimize the centrifuge footprint.
The explosion evidence motors and control panel can be certified to use in ATEX Zone 1 / Region 2 hazardous locations, IECEx Zone 1 / region 2 hazardous locations, CNEx Zone 1 / Area 2 hazardous locations. Several EX certificate, price as well as leading time are much distinct. Clients can choose the suitable EX LOVER standard per the work site request.
The GNLW553C-VFD decanter centrifuge is fitted with primary bearing temperature and coup sensors which give the GNLW553C-VFD improved levels of safety and satisfaction monitoring features.

Usage of 22’’ decanter centrifuge, model GNLW553C-VFD
The big bowl centrifuge is made for removal of low gravity solids from the fluid system in reduced operating costs.
1) The big bowl centrifuge can often treat water base mud and drilling cuttings
2) The big bowl centrifuge enables you to treat oil base mud and drilling cuttings
3) The big bowl centrifuge can be utilized in dewatering unit
4) The big bowl centrifuge enable you to recovery barite from drilling fluids

written by GN Desander Desilter \\ tags: , , , ,

Mar 31

Recently, we got news from competitors. Lots of solids control manufacturers close their office in Beijing, close their office in the downtown, close their office in USA, close their office in Russia…. All behavior shows that the drilling mud system suppliers want to reduce the production and operations cost, and they try to survive in this cold time.

BUT, GN Solids Control will keep normal operations and keep supporting the market even in the down time. Pls contact us freely at any time.

2015_gn_solids_china

GN operations base at USA.

GN Solids Control USA office and warehouse is keeping in good operations. If you are close to USA or you can come to USA very convenient, we welcome your coming to visit GN Solids America LLC and check GN decanter centrifuges, GN vertical cuttings dryer, GN mud cleaner, GN shale shaker at GN Solids America LLC location.

GN operations base at Russia.

GN operation base at Russia also working there for over 2 years. In the past two years, we shake hands with many big drilling contractors, mud service companies and solids control equipment big distributors. The client slowly tend to trust GN product after some small orders. And from this year, we got big orders from Russia client, they need more centrifuges and vertical cuttings dryer to support the drilling contracts.

GN operations base in Beijing, China.

GN already expand production capacity from last year. With more land for workshop and more high end technology mechanic process machine, GN solids control is growing up to big solids control company which can have similar reputation to USA brand solids control companies. We are attending CIPPE 2016 with the largest booth there in solids control field. 400 square meters booth at CIPPE will welcome each client from different countries, let’s talk more at the CIPPE and build health cooperation relationship for the upcoming project.

written by GN Desander Desilter \\ tags: , , ,

Mar 15

GN Solids Control is China leading company to manufacture the solids controls equipment and drilling waste management equipment. Shale shaker as the first phase separation equipment at mud circulation system, play an important role in the system. Our company founded 7 years before and we start the shale shaker design and production from then.  Until now, GN shale shaker have been exported to over 60 countries and areas for oil drilling application.

For now, GN Solids Control have different type shale shakers for option,  2 panel shaker, 3 panel shaker and 4 panel shakers. The client can choose the proper model to fit their unique project

.shale shaker

2 panel shaker GNZS752E is mostly used in non oil drilling industry. Most of client buy the mini shaker for diamond drilling or waste water treatment.

3 panel shaker is mostly used in HDD drilling, waste water drilling and Workover rig mud cleaning system. Some client also use the 3 panel shaker for oil drilling project.

4 panel shaker is most popular in oil drilling project. The shaker with longer deck can have better treating performance, mostly used in 500gpm mud system, 1000gpm mud sytem, 1500gpm mud system.

GN 4 panel shaker is replacement for Swaco Mongoose shaker. We have same type shaker screen which is replacement for Swaco Mongoose composite material shaker screens. Cheaper price carbon steel frame material screen is also available.f

GN 4 panel shaker can also be used for drilling waste management, water based mud drilling cuttings drying process. We call the shaker High G drying shaker or High G dryer in drilling waste management. After treated by GN high G drying shaker, the OOC can be reduced to about 10%, and the valuable Water based mud can be collected for reuse and the dry cuttings can be buries for permanent stock.

For oil based mud cuttings treatment, we recommend Vertical cuttings dryer for better performance, the OOC can be reduced to below 5%. OBM cuttings are more hazardous to environment and need to be taken care of more carefully.

written by GN Desander Desilter \\ tags: , , , , ,

Mar 01

This is simply not the first time CNPC order the actual solids control system through GN Company. This time often the ordered items are 3 units 500GPM drilling mud system which were successfully tested husband and wife days before. During the afterwards acceptance check by staff members from the CNPC, the process ended up being also very smooth.
The basic construction of each mud system is just as below:
1 . 20 ft container shaped mud tank for drilling mud storage space.
2 . De-sander cyclone and also de-silter cyclone matching the actual treating capacity of 500GPM. The under drying shaker is using GN’s popular type GNZS703E that is very popular in compact structure mud recycling system.
3. Centrifugal pumps equipped as shifting machine to feed the particular drilling mud to the cyclone unit.

drilling mud system
The features of these mud recycling systems worthy to say are:
1 . Double cellular levels shale shaker used to be both coarse shaker as well as drying shaker.
To make the mud system more compact, the shaker of GNZS706E was employed with the bottom layer screen for primary coarse solids separation, while the upper part screens are used for drying the particular solids discharged from the cyclones. This design was made along with full consideration on presence and full functions. This really is always GN does to offer the best solution for clientele.
2 . Frame to install tools for easy installation and travelling.
The de-sander and de-silter unit are pre-installed for a steel frame, and then position the steel frame on top of the actual mud tank. This style helps to save the time regarding client to install the shaker unit on the mud tank for every time changing function site. It could be seen as a flip package. Moreover, clients can certainly cover the cloth outside of the frame for poor temperature.

CNPC also ordered additional equipment and system through GN Solids Control
– Modular drilling cuttings management unit for CNPC construction site
2 .
5 Sets Up and down Cuttings Dryer for CNPC Algeria Project 3. WBM Drilling Squander Centrifuge system for CNPC
4. ZJ50 Rig Mud Cleaning System for CNPC LiaoHe Oilfield

It is the steady quality of GN’s services considerate services ensure the many repeated orders from CNPC. It is believed that more plus much more clients will do same thing, along with mud recycling system is absolutely not the only way we can cooperate.

written by GN Desander Desilter \\ tags: , , , ,

Feb 29

The solids control equipment like shakers, mud cleaner, centrifuge is widely used in the drilling fields, GN Solids Control is a top manufacture of these solids control equipment.

GN was founded in 2007 year, until now it has been through 9 years. In the past 9 years, GN specializes in manufacturing the solids control equipment and let “GN Solids Control” becomes a world-famous brand is the vision for all the people of GN in the future.

 

0204031

GN Solids Control

Now let us talk about GN’s strength:
1).GN has been concentrating on manufacturing the solids control equipment in the past 9 years. As what we said, concentration means endeavor, profession, experience, and also means success and harvest. Until now GN products have been servicing in over 60 countries in the world, most of the products were sold to the medium and high-end customers like Halliburton, Bake Huges.

2). In 2013, GN Solids America LLC was found in Houston, the Oil City of America, which is the 1st and until now it still be the biggest branch compared with other solids controls company from China. The goal is face to the customers in America, Canada, Mexico and to further expand the business and service the customers; http://www.gnsolidsamerica.com

3). GN is the 1st certified solids control company by API from China, also certified by Europe-CE, Russia CU-TR.

0204041

GN Solids Control Factory

4). GN has a special facility for manufacturing the shaker screens. Each year over 20000 pcs of shaker screen are sold to the customers from different countries. The screens are not only used on GN Shaker, but as the replacement screens used on other brand shakers like Derrick, Mi-Swaco, Nov-brandt Cobra, KEM-Tron.

5). GN has gotten 10 patents for making the solids control equipment, there are still some patens are under applying for.

6). With the solids control equipment, the product category of GN is complete. GN could manufacture the Shale Shaker, Mud Gas Separator, Desander, Desilter, Mud Cleaner, Centrifuge, Vertical Cutting Dryer, Agitator, Mud Gun, Centrifugal Pump, Screw Pump, Submersible Slurry Pump, Shear Pump, Flare Igniter, Screw Conveyor and Packaged Mud System;

Finally, if you want to learn more about GN Solids Control, welcome to visit GN’s website and contact us.
Web:http://www.gnsolidsamerica.com
Email:[email protected]

written by GN Desander Desilter \\ tags: , ,

займ на карту срочно без отказа онлайн займ на карту без отказа