займ на карту срочно без отказа займ онлайн
Dec 11

In the past many years, each year, GN Solids Control brought to the oil and gas sector some new and beneficial solutions for bettering the entire world. Year 2013, the new type of decanter centrifuge, with a couple of motors on one side in addition to positive pressurized control panel, year 2014, the increased vertical cuttings dryer that could be used for both OBM and also WBM, year 2015, a brand new solution GNGH10 and GNGN15 was designed and put directly into use, it is the final remedying of the drilling cuttings.
So far, since the first set of GNGH10 Solidification unit was accomplished in GN Solids Control’s yard and transported on the client’s place in domestic The far east, GN has sold many of that. and some of GN old clients who are pleased with GNLW series decanter centrifuges and GN solids control systems are considering to use the particular solidification unit in not to distant future. This solidification unit is actually purchased by a client via French and this is for his or her project in Africa. Lately, lots of African countries found aware of the necessary to protect the surroundings from being polluted with the drilling cuttings.


What is renforcement unit?
The solidification device is used for future the treatment of the solids discharge through the solids control system’s desander and desilter cones along with the centrifuge of the solids control system. Also, the solids phase discharged by the shale shaker could enter the renforcement unit after being addressed by the GNCM waste management system. By using material including cement and other material, often the liquidate component in the going cuttings which may permeate to the soil or underground drinking water are forged into several hard particles and become much less liquidate. Then they could be utilised in some other ways like constructing the road or so.
In a word, often the solidification unit is an fiscal and practical solution regarding waste management of going solids cuttings.

written by GN Desander Desilter \\ tags: , , , ,

Sep 16

GN 150 GPM Drilling Waste Management System
Recently, GN Solids Control welcomed one of the America client in Hebei factory. This client shows many interests to GN drilling waste management system. GN colleagues have discussed a lot on this system to answer any questions from this client. GN technical engineer has provided technical support and draw 2D drawings for this client.
Since every client has special demands for their equipments, GN always try to do their best.
This system consists of two tanks. The first mud tank is to separate the drilling waste and provide solids to the second mud tank. The second mud tank is used for drying the drilling waste.
For the first mud tank, GN recommends our client to use the following equipments:

 Vertical Cutttings Dryer & Decanter Centrifuge

1. One set of Mud Recycling System, which is including one shale shaker, one Mini
Mud Cleaner, one Centrifugal Pump and one mud tank.
GN Shale Shaker is using GNZS 703E- HB, this type can reach to 7.5 G high vibrating strength, which is adjustable by adjusting the vibration motor. GN Mini Mud Cleaner is using GNZJ 752E- 4N, the working capacity of this cleaner is 200GPM. And the GN centrifugal pump is using GNSB 4x3A-10J, this one is used for feeding the drilling waste to mud cleaner.
2. One set of Vertical Cuttings Dryer, which consists of one set of GN vertical cuttings dryer, one set of GN high configuration decanter centrifuge, two NEMO pumps, one centrifugal pump and one mud tank.
GN Decanter Centrifuge and GN Vertical Cuttings Dryer is one set of perfect match for cuttings dryer. Usually, the vertical cuttings dryer can deal with 30 tons to 50 tons cuttings each hour, and the oil can be controlled with 5 percent, which is very suitable for environment protection.
Sometimes, clients from some countries may have very strict demands on the oil percentage; in this case the cuttings need to be dealt with extra process such as chemical reaction which is another topic.

written by desander desilter \\ tags:

Jan 19

GN Solids Control Co.,Ltd. manufactures a complete line of mud recycling and mixing systems for the oil & gas, trenchless waterwell and mining industries. With cleaning capacities of 100 GPM to 2000GPM

Our small 150GPM mud system is one of our popular system which used for HDD, waterwell drilling ,etc. It has small foot print and easy for maintain. The main cleaning equipment for the system is a double deck shaker which worked as scalping shaker and drying shaker. Mud tank volume is 5.5m3, Jet mud mixer was completed with the system which can offer a high effiency mud mixing ability.

Equipment list:

Mud Recycling System

Mud Recycling System

1 ea Mud tank: net capacity 5000 Liters
2 ea Centrifugal pump: one for feeding shale shaker, the other for the mixing unit
1 ea Double deck shale shaker with 4 ea 4” desiler cones
1 ea Mixing Hopper

GN Solids Control is the first API certified Solids Control Equipments manufacturer in China.We understands the needs of the customer and puts their needs at the forefront of their design – making some of the most unique, user-friendly systems on the market.

 

written by GN Desander Desilter \\ tags: , , , ,

Jan 11

The GND series is a high performance desander that consists of Shaker, Desander cyclone, slurry pump, mud tank. The machine is designed for piling ,Slurry shield tunnelling, etc. GND series Desander has three standard models which each has capacity 50m3/h, 120m3/h,240m3/h.

Working Process

Desander

Desander

The slurry pump sucked the mud from the Sediment Basins or mud compartment, then enter into bottom shaker through inlet pipe, the particle size which is larger than 0.5mm will be separated out and flow to mud storage tank, The slurry pump feed mud from mud storage tank to hydrocyclone.the underlfow of hydrocyclone discharged to upper shaker . after dewatering process of the upper shaker, The dry solids wwas separated out. The overflow from hydrocyclone entered
clean mud storage tank.

Features

1.High mud handling capacity, sand can be removed efficiently.

2.The shaker screen has many advantages such as easy operation, low trouble rate, convenient installation and maintenance.

3.The adjustable vibrating force, angle and mesh size of the shaker enable the equipment possess a high screening efficiency in all kind of strata.

4.The high screening efficiency of the machine can excellently support drillers raise bore and advance in different strata.

5.Energy saving efficiency is significant since the power consumption of the oscillating motor is low.

GN Solids Control is the first API certified Solids Control Equipments manufacturer in China. We can offer mud recycling system for Oil/gas drilling, HDD,CBM drilling and Pilling. For more information of GND series desander , Please feel free to contact with GN Solids Control.

written by GN Desander Desilter \\ tags: , , ,

Jun 29

This week, GN will send 1 unit GNPS703 Shale shaker to India Customer from Mining Industry. Just like GN advertised, GN’s equipments could be used in Oil & gas drilling, Horizontal directional drilling and some other industry. No doubt, mining industry also need solids control equipments.

Mining Industry Shale Shaker

 

GN Shale shaker advantages:

* Metal & rubber composite material for dumping spring with longer life
* Vibrating motor choose Italy Oli brand, IEC Ex and ATEX option available
* Heat treatment on complete shaker deck
* Electrical components: Siemens, Schneider, ABB
* Surface painting & coating with heavy anticorrosive Japan Kansai paint
* Wedged type shaker screen for fast screens changing

Why GN Shale shaker

Customer knew GN for a long time but never given GN order before, cause they have’t seen GN equipments before. But we never given up informing customer about GN’s news such as GN attending CIPPE in Beijing & OTC in Huston.
What the customer request is the direction of GN’s endeavor. Our customer has a urgent project and will need one unit shale shaker. After inquiring some other manufacturer for shale shaker without getting a better solution. They come to GN, with discounted price, gn transfer one unit shale shaker from other project to our customer. What GN thought then is how to help our customer solve their problem. If you are sincere to Customer, customer will trust in you.

Besides GN Shale shaker, this Customer fron India mining industry together placed order to GN for Jet mud mixer and Agitator, now the equipments are under producing. If you need help from GN, please don’t hesitate to tell us.

Customer first will be always the faith of GN.

written by GN Desander Desilter \\ tags: , , , , , , , , , ,

Jun 15

GN shale shaker is one of the main equipments in GN’s products line. It is widely used in all GN mud recycling systems for oil drilling and HDD. As a spare part of shale shaker, the shaker screen determines the shale shaker performance to some extend.

Wedge block to fasten the shaker screen

GN shale shaker screen is installed and removed by fastening and loosen the polyurethane wedge block. Fixing one pc screen need 2 pcs wedge blocks on either side of the shaker deck. The wedge block is wedged into the slot produced by a piece welded angle stell.
When replace the shaker screen, just need loosen the wedge blocks. It is bery easy and time saving which greatly increase the working efficience.

GN Shaker Rubber Gaskets for Screen Protection

 

Rubber gaskets to protect the shaker screen

When operating the shale shaker, the high G vibration force produced by the vibration motor also make the screen shake up and down. In order to reduce the shakeing force functioned on the screen, we stick rubber strip on the screen frame. Besides this, GN Shale shaker also has the screen supporting steel beam according the screen frame as well as the rubber gaskets on the shaker deck. All above has greatly increase the impact resistance of the shaker screen and extended the screen life.

The above mentioned shale shaker screen installation design features all source from our customer’s feedback, that is why GN could keep growing and win more and more trust from customer. If you want to learn more about GN Solids Control equipments, welcome contact with us.

written by GN Desander Desilter \\ tags: , , , , , , , ,

Jun 08

There are some types of expensive additives and chemicals in the drilling mud which make the drilling mud high cost and environmental halmful. So, how to separate the drilling cuttings from the drilling mud to make the drilling mud recyclable become a concern attracts more attention.

The principle of Separating the drilling cutting

The basic theory of separating the drilling cutting is Solids Control. The solids control in oil drilling refers to remove the solid particals from the drilling fluids. Drilling cuttings is separated as solid particals step by step by some physical and chemicals methods.

Drilling Cutting Separating System

 

Drilling cuttings separating equipments

In each step of separating the drilling cuttings, we would involve one type separating equipments that are also called Solids Control Equipments.

Take the oil drilling cuttings separating as an example, we could meet some separating equipments below:
Shale shaker – which is matched with fine mesh screen to separate the cuttings of size large than 400 microns.
Mud cleaner – the polyurethane material cyclone could separate the drilling cuttings with size mimimum to 15 microns.
Decanting Centrifuge – in order to meet the high level demand of drilling mud for oil drilling, the drilling cuttings is of size several microns must be separated out from the mud. By using the centrifugal sedimentation principle, the centrifuge could complete the mission of separating the drilling cuttings at maximumly.

GN High Speed Decanting Centrifuge

After treatment by the centrifuge, almost all the drilling cuttings would be separated out from the drilling mud, now the active mud could be reinject into the drilling hole to make next circle. Sometimes, the active mud need to be added some additives which have run off when separating the drilling cuttings.
The above is a common process of how to separate the drilling cuttings from drilling mud, hope it’s useful to you.

written by GN Desander Desilter \\ tags: , , , , ,

Jun 02

Person who works on drilling site know that there are several additives in the drilling mud, like bentonite,clay and Polymer. When add the polymer into the drilling mud, we may use the shearing pump.

GN SHEARING PUMP

In a drilling mud recycling system, for the bentonite and other additives, we could use the centrifugal pump to shear and mixing them. But for long strings polymer, only the shearing pump could be used for its wider flow pass and smooth vanes.

Always the shearing pump is package together with hopper, mud gun and transfer line which could transfer the mixed mud into each tank compartment. The impeller of GN shearing pump is made of high wear resistant cast iron for longer service life. Any need for shearing pump and other solids control equipments, just feel contact with GN Solids Control.

written by GN Desander Desilter \\ tags: , , , , , ,

Feb 25

With the environmental protection consciousness enhancing and the desire to lower the cost of drilling, more and more drilling operators pay attention to drilling waste management and they also obtain much from it.

What is drilling waste management

Auger Conveyer

In order to protect the drilling head and take the drilling cutting out of the drill hole, we need inject drilling mud into the drilling hole by the drilling pipe. The expensive cost and recyclability promot the management for drilling waste. Simplely speaking, drilling waste management is to remove the useless drilling cuttings to get the active drilling fluids.

Main Equipments in Drilling waste management

1. Shale shaker
2. Auger conveyer
3. Screw pump
4. Centrifuge

Drilling waste management working principle

High Speed Centrifuge

High Speed Centrifuge

Shale shaker is the first stage equipments in the procedure of drilling waste management. Drilling fluids mixed with large size drilling cuttings get into the screen deck.

Under the function of vibrating force, the liquid pass through the mesh screen, while the large size solid particals are removed out and get into the screw conveyer. Now the drilling waste management starts actually.
The drilling waste is transfered in to the cutting drier. In this procedure, under the centrifugal force, the liquid get rid of the fetter solid phase and pass the mesh screen into the outlet pipe, the very dry solids waste discharged out which could be easily move to other place to bury or for other application.
Always, a storage tank is used to store the liquid out of the cutting drier. Here the liquid is pumped into the centrifuge by a screw pump. In the centrifuge, more tiny solids could be separated out. After the treatment by a centrifuge, the drilling fluids is active.

written by GN Desander Desilter \\ tags: , , ,

Jan 09

Here mentioned the hydrocyclone is used in drilling mud recycling equipments. Mostly we could see it on desander, desilter and mud cleaner. Therefore, we could classify the hydrocyclong into desander cyclone and desilter cyclone.

Desilter cone

Desilter cone

 

Continue reading »

written by GN Desander Desilter \\ tags: , , , ,

займ на карту срочно без отказа онлайн займ на карту без отказа