займ на карту срочно без отказа займ онлайн
Feb 28

500GPM on the exhibition of Australia

GN is not by delivering drilling fluid products to the clients’ site, but also anticipating and planning for the mud recycling system such as HDD ( Horizontal Directional Drilling) , CBM ( Coal Bed Methane), water well, mining  and geothermal well drilling rang from 150 GPM to 2000GPM. Optimize drilling performance and to mitigate the risk is our goal.

 Experts you need for your project

 Our experience experts are dedicate to devise a comprehensive and integrate fluids-related program to keep your project  producing at an optimum level.500GPM is our popular  drilling mud cleaning system . there are some standard equipments in 500GPM of mud recycling system.  

1) One Shale Shaker 

2) One Mud Cleaner with desander and desilter

3) Centrifugal Pumps  for feeding to desander and desilter

4) Centrifugal pumps connected with jet mud mixer for you drilling mud mixing.

5) Transfer function for transferring clean mud to the drilling rig mud pump.

6) Mud agitator and mud guns for mixing of the mud.

8) High quality mud tank which meets the shipment container size, or we are able to customize your mud tank for the mud recycling system

Please do not hesitate to contact with us if you need any of GN Solids Control equipments, and  your valuable idear is welcomed by us for mud recycling system

written by GN Desander Desilter \\ tags:

Aug 19

HDD drilling is the practice for drilling non-vertical wells. It can be broken down into three main groups: oilfield directional drilling, utility installation directional drilling (horizontal directional drilling), directional boring, and surface in seam (SIS), which horizontally intersects a vertical well target to extract coal bed methane.

GN will bring a 200GPM mud recycling system to Australia to show for trenchless 2013 on No Dig equipment. It’s contains 2 phase cleaning with shaker and desilter with mixing pump and mixing hopper with a very compact design.


GN 150 GPM mud system

GN 150 GPM mud system

International No-Dig Downunder Exhibition will be held in Sydney for trenchless technology. GN Solids Control build special mud system for trenchless technology and have stand every year at No-Dig Downunder exhibition every year.

GN Stand At International No Dig Exhibition

. Show Name: International NO-DIG Downunder

.  Adress: Sydney Convention and Exhibition Centre

. Time: 1-4 September 2013

. Stand No.: 48

GN500GPM For No Dig Exhibition

GN500GPM For No Dig Exhibition

GN Drilling Fluid Systems are widely used for Oil Gas drilling fluid circulation,Horizontal directional drilling fluid recycling,geothermal drilling,mining,coal exploration drilling,water well drilling etc.GN Solids Control have experience for drilling fluid cleaning solutions in all kinds of drilling.GN drilling fluid system is turnkey solution with first time commissioning service,training up of users engineer for operating the fluid system.

GN Equipments for drilling fluid systems

Shale Shaker, Mud Cleaner ,Desander ,Desilter, Centrifuge, Agitator, Mixing Hoppers, Flare Igniter, Various Tanks, Pumps, Degassers etc

written by GN Desander Desilter

Aug 08

GN solids control is the only API&ISO certified solids control and waste management system manufactrue in China till now.Our products have been exported to more than 60 countries around the world and serve for many NOC oilfiled projects.Our 14 centrifuge is the best alternative for Derrick DE1000 and Mi-swaco 518 ,due to its better price and reliable performance. For drilling waste management ,we use cutting dryer and screw conveyer for oil based mud ,Hi-G shaker and decanter centrifuge for water based mud.The function of solids control and drilling waste management equipment

Drilling waste management Cameroon

Drilling waste management Cameroon

Function of drilling waste management system

l  Reduce the amount of OBM or SBM on cuttings discharge to reduce waste volume and meet environmental objectives.

l  Recover valuable base fluids for reuse and lower the cost.

l  Reduce fluid content prior to other treatment, thereby increasing process capacity.

GNCD930 is a single stage continuous phase vertical screen centrifuge that has proven to reduce the oil on cuttings to as low as 5% by dry weight and typically achieves below 6% OOC levels. GNCD930 is capable of processing over 40-50 tons per hour and can deliver dry solids under the most severe loading. GNCD930 Dryer has been used on many types of fluids, including drilling fluids of both synthetic and oil based mud. As with all solid control equipment, like shakers, centrifuges and cyclone separator, viscosity will have an impact on performance. Viscosity is determined by many factors including solids content, solids size, fluid type and fluid temperature.

Trailer mounted mud system

Trailer mounted mud system

To be brief,solids control equipment can help circulate the drilling mud and reuse of the precious drilling fluids .While waste management is to separate the oil on cuttings from the drilling mud to achive dryer mud ,then discharge to land filed or road construction without pollute the air water and enviroment.

written by GN Desander Desilter

Jul 11

As vessel travels from ocean to ocean , there will be marine organism; marine organisms stay under the bottom of the vessel.Now the scientist and environment protection  staffs already paid attention to the need to reset instruments and to remove the inevitable weed barnacles and other marine life that would encrust a glider during very long voyages.

Pollution damage to the marine environment means any direct or indirect introduction of substances or energy into the marine environment which results in deleterious effects such as harm to marine living resources hazards to human health hindrance to fishing and other legitimate activities at sea impairment of the useful quality of sea water and degradation of environmental quality.

A hull cleaning recycle system can be used to help with the cleaning and reclaiming .Together with the customer ,GN developed such trailer mounted cleaning system and already applied on the seaside to do the job.

Hull cleaning system

Hull cleaning system

Customer use this separation system for sea water and shellfish to prevent the hybrid or shellfish from different area. When the ship arrived the port, they use one type scratcher to collect the shellfish stuck on the bottom of ship, and transfer the mixer of sea water and shellfish to the separation system. After treatment by the shale shaker and desilter unit, the shellfish could be removed from, water get back to the sea. Always the size of shellfish is not so small, therefore in the system there are only shaker, desander and desilter.

Trailer mounted system

Trailer mounted system


Trailer mounted sludge separation system is movable easily from one site to another, greatly increased the working efficience. This unit system structure simple only involving 2 stages solids control equipment.

written by GN Desander Desilter \\ tags:

Mar 15

What is trailer mounted mud system?

Solids control system or mud recycling system mounted on a trailer to realise easy transportantion from one drilling site to another.Including shale shaker ,desander,desilter,mud agitator,mud guns,mud tank ,lighting and electric control system.The main difference between ordinary mud system is trailer mounted while others are skid mounted.

Trailer mounted mud system

Trailer mounted mud system

What need to pay attention to when building a trailer mounted mud system?

1In some countries ,such as Austrailia ,has strict regulation on trailer ,has to be licensed and resisterd ,built according to Australia standard.

 2.Most countries have road limitations for trailer mud system,especially height and width ,such as height 5m ,wideth 3m.

GN solids control built a trailer mounted mud system for 2013CIPPE show ,including a 14m length tank ,shale shaker ,mud cleaner,centrifugal pump and mud agitator.Besides that also a trailer mounted drilling waste management system,including 14inch decanter centrifuge and cutting dryer.We can also make containerized drilling waste management system ,which has already exported to Russia and Argentina .

Containerized drilling waste management system

Containerized drilling waste management system

GN equipments have been exported to more than 50 countries around the world ,you can find GN equipments working in USA,Australia,South Asia,Middle east Africa,South America,and Russia.

If you are intrerested ,we can take you to the jobsite to check our equipment ,and welcome you to visit our factory near Beijing.

written by GN Desander Desilter \\ tags: ,

займ на карту срочно без отказа онлайн займ на карту без отказа